Printer prints blank pages

this>?
Xerox Phaser 6125 printer. told wrong?
get it serviced
and watch them, do this, cleaned all paths and blew out all sensors
cleaning is hard work watch them do it all
how and materials used
call them. now.
or read page on fuser jam here/.
pdf page 95

https://www.manualslib.com/manual/339573/Xerox-Phaser-6125.html?page=95#manual

using Xerox parts or clones, fuser and cartridges./

Completely or partially blank pages when printing from ...

Brother-USA https://help.brother-usa.com > answers > detail > a_id
Completely or partially blank pages when printing from Windows or Macintosh computer only. 1. Place a document with text or an image on the flatbed or in the ...

The printer prints blank paper - Brother HL-5240

iFixit https://www.ifixit.com > Answers > View > The+printe...
Sep 5, 2016 · 5 answers
Here are the steps to fix the brother printer printing completely blank pages issue. 1. First of all, you should restart the devices, ...

Fix brother printer printing blank pages

brothersetupsupport.com https://brothersetupsupport.com > fix-brother-printer-...
Jan 23, 2023 - Why brother printer keeps printing blank pages · Ink cartridges have jammed or there is a paper jam. · The printer head is blocked or jammed. · The ...

Hi, most paper jams like this are caused by something inside the printer called a "pickup roller" which is a series of rubber tube/grippy things that are responsible for moving the paper through the printer. If these rollers are dirty or worn down, they don't grip the paper properly and end up causing jams. In larger, more expensive printers, they have maintenance kits that you can buy to replace rollers, fusers, and other commonly replaced parts - but it's probably not practical for this model of printer. You may want to try opening the printer as much as you can (without removing screws) and using compressed air and a lightly-damp-with-alcohol cotton-swab to clean the rollers and other parts that touch the paper.

I'm not sure if you tried this, yet, but try the following link from canonusa.com website regarding clearing paper jams. Click on 'clearing paper jams inside the printer' on the page:

http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp810#ServiceAndSupport

Instructions

1. Check the display for an error message. If the display reads "Clearing paper from printer," the engine has detected a jam and is attempting to eject the jammed pages automatically. These pages will often be blank.
   
2. Check the display for "Performing PRINT/STOP TEST" or "Performing SERVICE TEST." Either of these messages indicates that the printer is going through a test procedure that may eject blank pages.
   
3. Reduce the amount of paper in the input tray if the printer is feeding multiple blank sheets at a time. The printer will pull extra pages through if the input tray is overfilled.
   
4. Replace the paper in the input tray with the correct size if needed. If the 4600 printer detects the paper as an incorrect size for the print job, it may eject the paper without printing anything on it.
   
5. Replace the ink cartridges if certain colors are blank on the page. Replace the black cartridge if printing a black text document that is coming out blank. The printer may attempt to print even if the ink level is low or empty, but will unable to print anything on the page, causing it to come out blank.
   
6. Remove the sealing tape from newly installed cartridges. The tape covers the print heads and should be removed before installing the cartridges. If the tape is left on, it will prevent ink from getting on the pages as they print.
   
7. Press the "Check mark" button on the control panel to enter the printer menu. Run a diagnostic so the printer can attempt to determine the cause of the blank pages printing. Press the up or down arrow to select "Diagnostics." Press the "Check mark" button. Press the "Down" arrow to highlight "PQ Troubleshooting." Press the "Check mark" button. The printer runs a diagnostic and returns to a ready state when done.
   

for this model, the drum unit have to be cleaned and free from dirt and toner.. and the common problem is the eject roller...they are located at the top of the printer, the long black roller with few hard rubber roller.. once this roller is harden, it will give paper jam problem..and the paper will crumble each time you print....especially when the printer have printed many pages... you will need to send it to the tech to replace the eject roller.

Yes you can replace the transfer roller, but check to make sure the roller is firmly seated into its holder and that the springs are contacting the metal shaft.

Good Luck

Please follow the instruction given in this link:

clear the paper jam as given in this link:
http://support.lexmark.com/cgi-perl/knowledgebase.cgi?ccs=37:1:0:512:0:0&framed=&docid=ENUS25568&relevance=1

If paper jam occurs frequently, wipe the pickup roller with a clean dampened cloth. Follow the steps below:

1. Open Cover AB of the printer.
2. Open the cover below the paper path roller.
3. With a clean dampened cloth, wipe the pickup roller.
4. Close Cover AB.

If the glass on the print head filter is dirty with toner, wipe it with a clean cloth. A vertical white line may appear in the printout. Follow the steps below:

1. Open the front cover.
2. Tilt the waste toner collector and pull it out.
3. Grasp the handle of the print head filter with your fingers and gently pull it straight out of the slot. (**Note: Be careful not to spill toner that has accumulated on the print head filter. )
4. With a clean cloth, wipe the glass surface of print head filter.
5. Hold the print head filter by the handle and gently insert it all the way into the slot.
6. Reinstall the waste toner collector.
7. Close the front cover.

The print quality problem might be something as simple as turning off the Toner Save mode using the printer driver or the printer's control panel menus.
There may be a problem with the photoconductor unit. You may need to replace the photoconducter unit.
Or it might be something rather more serious (hopefully, not)Print out a status sheet. If a blank page is ejected, the problem may be with the printer. Turn off the printer and contact your dealer.

Have you checked the obvious things? Such as pulling the tape off the new cartridge? Also make sure the transfer roller under the toner cart. is in securely.