Street name that is a number.

Kenwood Saudi Arabia Mobile Service Center

addresscustomerservicecenternumber.com https://addresscustomerservicecenternumber.com > Co...
Address. Westewrn Region, Jeddah, Al Baghdadia, Al Gharbia, Hail Street, Al Amal Plaza, First Floor, Jeddah, Saudi Arabia · Contact Number. +966-2-6500282( ...

• 1

  Turn the ignition switch to "ON" or "ACC."
  

• 2

  Press the "NAV" button on the center console, and tap "Accept" to open the navigation menu.
  

  
  

• 3 Tap "Destination Entry."
  

• 4 Tap "Street Address" to input a destination. If you would like to choose a point of interest, tap the "Point of Interest" option.
• 5 Tape the option to "Input Street Name In." If the current state or country is not correct, tap the "State" or "Country" button to change it.
• 6 Type the street name, then tap "List" to choose your street.
• 7 Input the house number for the address, and tap "Continue."
• 8 Input your city name, and tap "Continue." The navigation system will calculate the route and display a map.
• 9

  Tap "Go" to activate route guidance. The system will give you turn-by-turn directions to your selected destination.
  


car headlights.

If you are having problems finding a particular address, try some of following tips. In some cases the address may be listed as being in a different city other than the one that was chosen. When the unit asks for the City Name, try choosing Search All Cities. If the address is listed under a different City Name, doing this will allow the unit to find the address. Also, when entering a street name, it is important that you leave off any direction or label. For example, if the address was 2536 SW Melrose Place, you would enter 2536 for the house number and only Melrose for the street name. Using the house number and city/state, the unit will fill in the direction (SW) and label (Place).

If you are still unable to find the address, the mapping may not have the address available yet. Please report this to our Cartography department using the Error Report Form which can be found at the following link:
http://www8.garmin.com/cartography/mapSource/errorForm.jsp

just press done on the street selection screen without entering a number. alternatively if you know the crossing street you can enter the streets into the intersection option in the where to menu

a street name is just that, like I live on Jones Street, an address adds a number, like mine address is 1772 Jones street

start with a basic address of a main st in your city and see if it finds that. be sure to separate the street name and st,ave,rd. i.e
enter in the house number 123 done.
enter in the street name bank st done.

this should come back with a street for you. if not make sure there is a map location for the street you are trying to find. a newer neighbourhood may not be listed in your gps.

Some GPS require the letter of the street first. Also most roads, even those with route numbers have a name.

In order to get the unit to speak out street names, you have to have selected a voice that has a (TTS) next to it. This stands for Text-to-Speech. Press the button that looks like a wrench at the bottom of the main screen. Then press the button that looks like a pair of lips. You should see a menu with language and voice choices. Make sure you see the (TTS) next to the one you choose. The unit should then speak the name of the streets for you.

To find streets that are numerical, not names, enter the address normally to start. Enter the State, City, and House Number. When it asks you to enter the street, look at the bottom of the keyboard. You will see a key marked 123. Press this key, and numbers will show up instead of letters. Type in just the numbers (25 for 25th Avenue, etc.) and hit Done. The street should show as (25th (St., Ave., etc)). Press the correct entry.