We recieved system error E007 on our cannon IR2016 how to solve this problem.

E007 - Fixing film rotation error

You have to disassemble fuser unit and inspect a fixing film, if damaged - replace.

The official documentation says:
E007 0000 Fixing film sensor failure
The fixing film sensor is faulty. - Check the connector of the fixing film
sensor.
- Replace the fixing film sensor.
- Replace the DC controller PCB.

That means that fixing film ( Folie ) is worn out. Replace fixing film assy.

Error code E007 on an ir2016 means that the fuser film has a fault. The fuser film is the black sheet that melts the ink into the paper on the final stage of the copy process. It more than likely has ripped apart. You will need to call a service tech for this one.

it error code means fuser unite problem please change fuser unite then solve your problem

you have to replace the fixing film.

Because a E007 is related to a non-detection of the Fixing Film/Upper Roller not spinning correctly. Please check the condtion of your Film also check the green handle in this area for paper jam removal if it is broken or removed, may also cause this error. Good luck sir let us know how you make out.

This code from Fixing Unit like rotation film in fixing unit
check it and white grease i hope problem will solve if none then contact me for future.

This error indicates the fuser film is not in the home postion, or the film is ripped/torn. Unless you are able to service it yourself, you will need to get a technician in.

 I  HAVE PROBLEM IN CANNON COPIER IR 2016, ERROR CODE E007. KINDLY HELP ME TO SOLVE THIS PROBLEM

My Canon copier IR2016 Problem code E007 Solve the problem pls
help me