At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
do not want to part with the tape while it is returned
to be serviced, how to release tape from machiene
without complete dissassembly is my problem.
OVERALL this deck is problematic; has to be
reset often from lockup or lack of tuning in channels
has to have power disconnected to recycle internal
computer glitching out I suspect, inherant to the model/
software. Not the 1st DTV tuner/deck I have heard of this
happening too. HOW TO GET TAPE transport to manually
release tape ANYBODY?
VHS tape stuck; take up reel has no tension on it
found by dissassembly, might be under warrent but
do not want to part with the tape while it is returned
to be serviced, how to release tape from machiene
without complete dissassembly is my problem.
OVERALL this deck is problematic; has to be
reset often from lockup or lack of tuning in channels
has to have power disconnected to recycle internal
computer glitching out I suspect, inherant to the model/
software. Not the 1st DTV tuner/deck I have heard of this
happening too. HOW TO GET TAPE transport to manually
release tape ANYBODY?
You can't post conmments that contain an email address.
Hi, , the sensor of your unit was broke,,, or the mech is stuck,,, if you know how to dis assemble ,,, just check the mech.system first. , , , , and the rubber belt lower tape head part.. . if problem accur.. .. go to your nearest repairman
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If the VHS tape is stuck inside, and when you push the eject button, it wont come out. Then you need to unplug the VHS player, take it apart so that you can access the inside. See how the tape is stuck inside and start to take it out the best you can. Once you get it out you may have to throw away the tape if it is messed up badly, if not wind it back up. Put the VHS player back together once you get the tape out. Then try to play another VHS tape and see if it works again. If not, it may be a bad VHS player or it may be the tapes. Hope this helps. I have had to take mine apart to take a tape out, so that's how I know
I had this problem when copying an old family vhs tape. I had to unscrew
the top of the magnavox to access the vhs tape. Then, I gently removed
the tape and replaced the cover. After winding the tape back, I put it
in the player and immediately pushed fast forward for about 3 seconds
before hitting play followed by d.dubbing. I was able to make a copy of
the tape and did not damage my original.
I think you are refering to the tape itself in the VHS cassette and it not being stuck inside the Video itself!
So if you are... don't use the spray... video cassettes have a brake system inside them. It sometimes breaks. If you turn the cassette upside down so you can see the white reels, inbetween them near the bottom (where the side label goes) you will see a small hole. If you put a pen inside it should release the reels so you can turn them with your finger. If they don't turn it may be broken. In which case... Get hold of a blank tape, the same length as yours. Carefully remove the screws (5) on the bottom. See how it's put together. Once you understand how the tape moves etc. Take out the reels with the tape, then dismantle your video and put the reels with the old tape into the new holder. It should work as good as new.
PS try not to touch with fingers the tape.
THERE IS A SENSOR SWITCH THAT TELLS THE MACHINE THE TAPE IS LOADED ... SOUNDS LIKE IT IS STUCK.
PROBLEM IS ACCESS WITH COMBO'S. THEY ARE A PAIN TO GET AT. THE WHOLE BACK COVER TO THE TV MOST OF THE TIME HAS TO BE REMOVED,...
I KNOW ITS NOT MUCH HELP BUT THE MANUFACTURES KNOW THAT... HOPE YOU CAN GET TO THE TRAY INSIDE.
Joe_Rex
VHS tape stuck; take up reel has no tension on it
found by dissassembly, might be under warrent but
do not want to part with the tape while it is returned
to be serviced, how to release tape from machiene
without complete dissassembly is my problem.
OVERALL this deck is problematic; has to be
reset often from lockup or lack of tuning in channels
has to have power disconnected to recycle internal
computer glitching out I suspect, inherant to the model/
software. Not the 1st DTV tuner/deck I have heard of this
happening too. HOW TO GET TAPE transport to manually
release tape ANYBODY?
×