Question about NEC Dterm DTP 16D-1 Corded Phone
To Update Time: From operator telephone with receiver hung up; Press feature key; dial 9,#; enter hour and minute i.e. 0135; (press recall key to change from am to pm); press feature key to save and exit.
Posted on Apr 06, 2009
SOURCE: Set Time DTH-16D-1 (BK) TEL
Here's how you adjust the time:
1. Press <TRANSFER>
2. Press <CONF>
3. Press *
4. Press <TRANSFER>
5. Press <CONF>
6. Press #
7. "CAT MODE" displayed on LCD
8. Press <REDIAL or LNR/SPD>
9. "COMMAND" displayed on LCD
10. Press 02
11. Press <RECALL>
12. Press 2
13. Press <RECALL>
14. "02>2>Current Time" displayed on LCD
15. Input correct time using military time (HH MM SS)
16. Press <CONF>
Posted on Jan 18, 2008
SOURCE: Caller ID Scroll
Your system needs to have a mif-m card and kmm chip installed and all programming setup in order to scroll through the caller id. If this is all setup you can hit the directory button and than use the arrow buttons under the display to scroll. ldtsnj.com
Posted on Jan 02, 2009
Did you ever figure out how to fix this?
We just had a long power outage last night and our phone system wasn't accepting outside calls this morning. We reset it, which fixed the problem after 10 minutes or so of waiting.
The new mystery is why the admin phone is now flashing this "Printer Trouble" error message.
Posted on Jun 17, 2010
Tips for a great answer:
Oct 08, 2014 | NEC DTH-32D-1BK
Feb 13, 2014 | NEC Electra Elite DTH-32D-1 1-Line Corded...
Nov 01, 2012 | NEC Dterm 80 Phone Dth-8d-1 bk Tel 780571...
Apr 13, 2010 | NEC Dterm DTP 16D-1 Corded Phone
Mar 26, 2009 | NEC DTU 8D-2 Corded Phone
Dec 28, 2007 | NEC Electra Elite DTU 16D-2 Corded Phone
996 people viewed this question
Usually answered in minutes!