In bizhub 500 the machine is showing error code c-2402 what is this?

Question edited for clarity and toss in some CAPS.
Question moved to category.

Error Codes > Konica-Minolta > bizhub 500 > Code C-2402

Printcopy.info https://printcopy.info > code=C-2402
Code: C-2402; Description: Erase lamp (EL) connector slip-off abnormality. - When EL turns ON before starting an initial charging, EL abnormality has been ...

Missing: press ‎C6000 ‎Pro.

Bizhub PRESS C6000 error codes

Copytechnet https://www.copytechnet.com > ... > Konica Minolta
Aug 7, 2013 - 1. Check the connection between the rear side connector of the fusing unit and the main body side connector, and repair it if any abnormality.

bersihkan rumah korona bawah, dan ganti kawatnya

Hi
There is a very good summary list of all the error codes for your machine, which you may find useful, here:
Error Codes Konica Minolta bizhub 500
My main reason for giving you this link is that you cam get a service manual here for a very reasonable cost which should give you step-by-step instructions and diagrams for the change you want to do.
Good Luck

no such code for that model

Bizhub 500 codes are c-xxxx

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

What causes discharge in machine code C2802 bizhub 500.? and how to solve it ..? thank you

ihave error code c5oo c501 in bizhub 211

TCR output abnormality.Toner control ratio abnormality error code.Restart the machine if code removes then its OK otherwise simply replace the developer and execute TCR adjustment again.

when machine waqs working atonce power failure occurred and after that it showed error D370

My machine Bizhub 500 Sows a code 2803.Find its solution please help me.

sir i have a bizhub Minolta 500,the problem is that it shows the code c-2801 and out put trays are not working ,when i start the machine and code is shown and machine is not stared please help me its urgent case