I have an # MTH 30-9106. Esso gas station with no wiring instructions. Can you tell me how to wire this up

These 4 things come to mind..

1. do you use any gas additives?
2. when was the last time you had a tuneup (with wires and plugs)?
3 Do you get gas at a particular station
4. Possible clogged gas filter.

This sounds like a "CAR TALK" question to click and clack. On most NPR stations nation-wide.. good luck.

okay okay

u just shud change the gas because:


First, you need to go to Toptiergas.com to find out which companies are carrying good enough gas to put into you car Most gas stations haven't been selling decent gas, thus leading to problems with our engines.

Secondly, keep ur gas receipts. The engineer has told me situations where people had to pay $2200 out of their pocket because they failed to keep the receipt. The purpose of the receipt is for when u go to BMW and tell them that u have a problem with ur car and they run tests, if they come out and tell u that bad gas caused for this to occur, u have the gas receipt and can now approach the corporate of that gas station.

Thirdly, if you have already put in horrible gas from previous gas stations, which is wut i did for the past yr, there is some bottle that they sell at the dealership which will clean out ur fuel injection system from the previous bad gas u had put in. You simply just pour the bottle into the gas tank before you fill up that way it mixes in

hope this help u

I have seen this kind of problem once. it cost 1800$ to ESSO
you have to know that the flash point of fuel is different
empty your fuel tank like usually and fill her up with new fuel at another gas station
flash point is the temperature where the fuel will ignite without spark. the flash point in summer is low and in autumn or winter is high

You can find all the Wiring diagrams on the MTH website if you follow this link

http://www.mthtrains.com/search/apachesolr_search/Operating%20Gas%20Station?docsearch=true

I'm not sure what the model number for the gas station you have is but you should be able to find it here.

Don't know the solution....but am having the same exact problem! LCD screen just showing static-like jumpy lines. Must be a wire connection I guess but when put in docking station and turned on, computer still doesn't see it as can't access the menu on lcd screen -- can't see it! Help! Just, hopefully, recorded my 19 mth old son's first time in the snow!

if u need a manul u shouldnt be around a car system. but its verry simple the wires have words on them that tell u what goes to what

Sounds as if you have power wire hooked up wrong. Should be 2 power wires. Probably a red one witch should be connected to Ignition on only power source, This your main power. Should have a yellow wire, which is memory backup which should be connected a constant power source In othe words hot all the time even with ignition off. You can use a test light to test power points.

A) on the gas station gets one wire from the transformer and one to the activation botton off A on gas station ( acc power from transformer )
B) gets ground from the transformer
C ) to activation botton
D ) to Acc power on transformer
E ) ground on transformer

was able to find the instructions for the swith track

Tune up? Wires could be brittle and ignition power is being forced through the wasted wires