My Aqua logic chlorine generator reads "cell power error" "chlorinator off". I have checked the generator and it is clean and free of deposits. Fuses in the box are not blown. I can kill the power by tripping the circuit breaker and the message will go away for a short while and read the salt content. But it reverts back to the message above. Any suggestions?

What brand of salt water chlorine generator do you have?
Have your water tested professionally at a pool store. Balance the pool water chemistry. Check the electrolytic cell for any calcium deposits on plates and follow manufacturer's instructions to clean.

Mar 18, 2009 • Pool & Spa

Question 2

Anonymous

Contributor 3 Answers
Posted on Jul 06, 2010

Anonymous

Contributor

Joined: Jul 06, 2010

Answers

3

Questions

0

Helped

3805

Points

4

See on www.manulabo.com/hayward to have your free solution

Answer 2

Anonymous

Expert 64 Answers
Posted on May 26, 2010

Anonymous

Expert

Joined: May 18, 2010

Answers

64

Questions

0

Helped

45523

Points

109

The main pcb has shorted out. It would either have to be repaired or replaced. A new one is pretty expensive. You can also buy a rebuilt one. I sell these if you need one or can't find it. [email protected]

Related Topics:

Trustworthy Expert Solutions

2 Answers

Anonymous

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

I have a cell t15. everything seems to be running normal, no error message on the panel but not generating chlorine. Salt is at 3000 ppm. everything seems fine but no chlorine even at super chlorinate

What is wrong with my Aqua Rite Electronic chlorine Generator.

Have replaced T-15 cell and calibrated yet reading went down to 800 PPM and check salt and inspect cell LCD are on. Salt level is good. What could be wrong?

Control panel shows flow ok then power light comes on for about 10 second thens gose out still read salt, temp.voltage and ect. this is a Aqua Rite generator also check input voltage and 20 amp fuse

I replace the Turbo Cell a month ago, the box is reading 3000 of salt however when testing the chlorine level is showing less than .5. What may be the problem?

After cleaning my aqua rite cell the salt count went from 2800 to 700 what is wrong?

What do I do when the display tells me, chlorinator off, cell power error?

Aqua rite system is not reading the proper salt level so it is not producing salt. We have checked the control board and the turbo cell is clean. Any suggestions?

My Goldline Aqua Pro control panel says "no cell power" and is not generating chlorine from my salt system

No light on cell status on my chlorine generator

Not finding what you are looking for?

Hayward Logic PS-16 Pool & Spa Automatic Control - Control System

I have a cell t15. everything seems to be running normal, no error message on the panel but not generating chlorine. Salt is at 3000 ppm. everything seems fine but no chlorine even at super chlorinate

Ask a Question

Top Aqua Pool & Spa Experts

john h

Kardoc

David Spradling

Are you an Aqua Pool and Spa Expert? Answer questions, earn points and help others

Manuals & User Guides

Related Topics:

Trustworthy Expert Solutions

2 Answers

Anonymous

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

I have a cell t15. everything seems to be running normal, no error message on the panel but not generating chlorine. Salt is at 3000 ppm. everything seems fine but no chlorine even at super chlorinate

What is wrong with my Aqua Rite Electronic chlorine Generator.

Have replaced T-15 cell and calibrated yet reading went down to 800 PPM and check salt and inspect cell LCD are on. Salt level is good. What could be wrong?

Control panel shows flow ok then power light comes on for about 10 second thens gose out still read salt, temp.voltage and ect. this is a Aqua Rite generator also check input voltage and 20 amp fuse

I replace the Turbo Cell a month ago, the box is reading 3000 of salt however when testing the chlorine level is showing less than .5. What may be the problem?

After cleaning my aqua rite cell the salt count went from 2800 to 700 what is wrong?

What do I do when the display tells me, chlorinator off, cell power error?

Aqua rite system is not reading the proper salt level so it is not producing salt. We have checked the control board and the turbo cell is clean. Any suggestions?

My Goldline Aqua Pro control panel says "no cell power" and is not generating chlorine from my salt system

No light on cell status on my chlorine generator

Not finding what you are looking for?

Hayward Logic PS-16 Pool & Spa Automatic Control - Control System

I have a cell t15. everything seems to be running normal, no error message on the panel but not generating chlorine. Salt is at 3000 ppm. everything seems fine but no chlorine even at super chlorinate

Related Topics

Ask a Question

Popular Questions

The lever on my multiport valve is stuck, it is on

Clorinator off no cell power.

Goldline controls 066008g-1

Plugged in and turned on but doesn't move

My tiger shark pool cleaner

Top Aqua Pool & Spa Experts

john h

Kardoc

David Spradling

Are you an Aqua Pool and Spa Expert? Answer questions, earn points and help others

Manuals & User Guides