Which connectors are used for front panel, power on (red @white) and led ( blue @ white) please show a close-up view

Hi,
On the motherboard the pinouts on the front panel should be colour coded, and marked with letters like in this picture >>>>>


The connectors are also marked corresponding to where the connect on the motherboard, like in this picture >>>>>>which connectors are used for front panel, power - 66ce2fc.jpg src="/uploads/images/66ce2fc.jpg" alt="66ce2fc.jpg" class="h_mi" />

If the board is not colour coded then the motherboard will marked with the same letters, you may need a strong light to see the marks.

Regards.

This is Gateway Support, GT5428, and the Front Panel connections on the motherboard,

http://support.gateway.com/s/MOTHERBD/INTEL/4006158R/4006158Rmvr21.shtml

Numbering of the Pins;
Going across the top, start at the upper Right corner.
This is Pin 1.

The pins on top row are numbered Odd.
Starting from the Upper Right corner going to the Left,
Pins 1, 3, 5, 7, and 9

The Pins on the bottom row are numbered Evenly.
Starting at the Bottom Right corner going Left,
2, 4, 6, 8, and 10

1) The two pins in the Yellow are for the Harddrive Activity Lamp. (HDD LED) (Pins 1 and 3)

2) The two pins in the Blue are for a Reset switch.
(Pins 5 and 7)

3) The two pins in the Green are for the Power On light. (PWR LED) (Pins 2 and 4)

4) The two pins in the Red are for the Power On switch. (Power On button. PWR SW1)
(Pins 6 and 8)

5) Pin 9 is a +5 Volt pin.