Pinnacle Dazzle DVC100 PC TO MY TV

Hi ,
There is a possibility that you need to reinstall the driver .
If you are under Vista , you can download it from here :
http://cdn.pinnaclesys.com/SupportFiles/Hardware_Installer/readmeHW10.htm
The same driver works also under Windows 7 .
Best regards .

This should help. its how to connect a Dazzle DVC100 to your tv, if you are using a xbox 360. The grey cables are from the xbox, the black cables are from the RCA Cables.

Go here this should do the trick. make sure you connect your device first.

http://driverwhiz.com/drivers-en?brand=Pinnacle&logo=Pinnacle&subid=1001-us-en-10000001968&gclid=CM2Lg6ihqKMCFRCenAodtRKK3g

i would try it on another television and if that dosnt work then it is probably the module it self, it mght be time to buy a new one

Hi and Welcome to Fixya,

The reason why it is now showing because your computer did not detect it. If your Windows operating system is vista 64 bit then go ahead and download the driver in here. www.pinnaclesys.com then click on support, download/Studio and dazzle hardware for vista.

Hopefully it helps you.

You need a faster video card for it to make it work properly. Install the video card driver.

you will need to transfer through firewire to get the best results. Cable should be provided with the camera but you may need to install a firewire card in your pc/laptop

Download new drivers from the Pinnacle site.

Is this possible but you need to install the program and the driver for your mac os. You can call customer service of Pinnacle then order the disc for your dazzle for mac