Sharp MX 3100n showing code H5-01 , what is it,how do I fix

https://printcopy.info/?mod=erc&brand=Sharp&model=MX3100N&code=C1-14

https://elektrotanya.com/sharp_mx-2600_mx-3100.pdf/download.html

Hello Tijjani,
The error code that you are experiencing is as follows;
F2 73 IMPROPER TONER CARTRIDGE DETECTION (YELLOW)
You need to replace the yellow cartridge with the proper part # Item Number: MX 31NTYA, MX31NTYA.

Good Luck!
Rich Lilja

re install the drivers, and check your files does this happen with word doc or pdf

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Developer unit is not detected , or developer is depleted ( which is very bad , because it could mean that it spilled inside your copier , it is very abrasive)

try removing and re-installing the developer unit , and maybe try using another unit for control,
could also be your harness, see if plug of developer unit is plugged into mainbord

This is a scheduled maintenance programmed into all of these machines. It pops up when the machine crosses a certain "milage." If your machine is still making nice copies and prints it's nothing to worry about.


Copier Collin Houston TX Copier and Imaging Expert

image cartridge cyan need to be replaced

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Which windows platform.

First check with a new yellow drum.

how can i go simulation machine showing maintennance required TA and panel is hang

MFP -Image data decoder error
Try to clear code. enter sim with program key- asterisk*-clear key- asterisk*(P-*-C-*) enter sim 14 print key execute yes clear all machine will reset. if code comes back it is not just not a fluke and you may have another issue.