Hp wireless mouse not lighting up

Hello, have you tried changing the batteries in your mouse? They are probably dead or dying and that is why it is not working. Also, try restarting the computer. If you cannot even use a regular wired usb mouse, there may be something going on. Try changing the batteries, restarting the computer, and using a regular usb and a regular PS/2 mouse.

Thanks for using FixYa!

Remove the battery of the mouse and install new one and then press connect button from the mouse side and the receiver side also.
Hope this helps. Please rate my response.
Thanks.
Have a good day.

try cleaning the laser of the mouse. the light spot at the bottom it mite have some dirt or something on it thats not alowing it to have a good conection

This can happen when the battery's are starting to die. Replace the batteries and then test the device again.

Try to take off battery and next push and hold down the small button that protrudes where the receiver is placed in the mouse, put back battery and simultaneusly release the button,it might make the mouse operate correctly. Good luck!!!! Chawah.

visit this site it will tell you the instructions step bye step

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00006821&cc=ca&dlc=en&lc=en&jumpid=reg_R1002_CAEN

First thing to do is check the device manager. If it shows up there, make sure that there are no icons saying there is a problem.

I have the same issue and I think this is one of worst product that HP makes.

try the reset buttons

just unplug the whole detector from power for a minute..try it again..