Question about Canon PowerShot SX 200 IS Digital Camera

1 Answer

Reset the date and time to original factory settings

How do i reset the date and time to original factory settings on a canon sx200is

Posted by ag_090112009 on

Ad

1 Answer

Johny

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 540 Answers

Hi,
Please follow the steps below to reset the setting to default...

1. Turn on the camera and press the <MENU> button to open the menu. 2. Using the reset the date and time to original factory settin - arrowrightbutton.gifbutton, highlight the yreset the date and time to original factory settin - setup_icon.gif="/uploads/images/setup_icon.gif" alt="setup_icon.gireset the date and time to original factory settin - sx200resetscreen.jpget up) tab. reset the date and time to original factory settin - funcseticon.gif 3. Using the arrowdownbutton.gif button, select [Reset All..] and pressreset the date and time to original factory settin - funcseticon.gifoads/images/funcseticon.gif" alt="funcsetreset the date and time to original factory settin - sx200resetconfirm.jpg" />. 4. Select [OK] and press funcseticon.gif. sx200resetconfirm.jpg
nreset the date and time to original factory settin - setup_icon.gif=

  • Settings cannot be reset when the camera is connected to a computer or to a printer.
  • The following cannot be reset:
    • Shooting mode
    • The [Date/Time], [Language] and [Video System] options in the setup_icon.gif(Set up) menu
    • White balance data recorded with the custom white balance function
    • Colors specified in the [Color Accent] or [Color Swap] modes of My Colors
    • Newly added My Camera settings

Posted on Feb 19, 2010

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Reset default camera says busy


Give the camera some time. Don't remove the battery till the reset is done. I hope your battery was charged before you started the reset.
If the battery runs out of power, you must charge it comlpete, before putting it in again. I hope the reset went well. If not only try a reset with a fully charged battery.

Dec 06, 2013 | Canon PowerShot Cameras

2 Answers

How to reset full settings of canon 550D?


Remove the battery for 15 mins, replace the battery and the camera will be set to the default settings. Go to the camera's Menu setting and set the Date & Time.

Aug 27, 2012 | Canon EOS 550D Rebel T2i Digital Camera

1 Answer

I have a Canon PowerShot SX200IS digital camera. Can I recharge the batteries in a 220/240 outlet?


If you're using the supplied CB-2LX battery charger, then yes. If you're using another battery charger, please check its specifications.

Aug 23, 2012 | Canon Powershot Sx200 Is Digital Camera...

1 Answer

Reset fujifilm s2940


There is no complete reset, other than removing the batteries and letting the camera sit until the internal battery drains (at least 24 hours).
There is a RESET command in the Setup menu, which will reset everything except Date/Time, Time Difference, Background Color, Battery Type, and Video System.

Feb 15, 2012 | FUJIFILM S2940 Digital Camera

1 Answer

I have a Canon Fax JX210P, and I get the message recommend new ctrg even though I have already put a brand new one. As a result all documents are stored in memory. How can I disable the option that stores...


A factory reset to the original settings may fix the problem. Make certain your software is up-to-date and any changes to the canon firmware are current for your operating system.

Jan 12, 2018 | Canon FAX JX210P All-In-One Inkjet Printer

1 Answer

How can I reset my camera to factory settings I have a canon powershot a590is


With your camera turned on and NOT connected to a computer.
-Press the menu button. -Use the arrrows to select tools at the top if camera is selected. -Adjust the arrows to select RESET ALL. -Press the FUNC. SET button.
The following cannot be reset. -The shooting mode. -DATE/TIME, LANGUAGE, & VIDEO SYSTEM options -White balance date recorded with the balance function.wswift_3.jpg

May 17, 2011 | Canon PowerShot A590 IS Digital Camera

1 Answer

I just bought a canon powershot sx200is. I


Sounds like you didn't use the "safely remove hardware" function. Remove the card and battery...press all the buttons...leave it alone for 20 minutes...insert the card and then the battery...try to turn it on. Let me know.

May 09, 2010 | Cameras

1 Answer

No flash and screen flashes "E:91:01"


Hi!

The error E:91 indicates a hardware malfunction in the Camera. In this case, you may try resetting the Camera to the original factory settings.
Follow the steps given below to reset the Camera to the original factory settings:
(a) Press the Menu button to display the menu screen.
(b) After pressing the right arrow on the control button, go to the (setup) setting, then press the right arrow again.
(c) Next, press the left/right/up/down arrow on the control button to select "Setup 1" option.
(d) Then, select the "Initialize" option OK, OK.
(e) Set the clock if date and time screen appear.
(f) Next, turn off the Camera and remove the Battery pack and press and hold the power button for 30 seconds.
(g) Then, reinsert the Battery pack and turn the Camera ON.

Performing all the above steps will reset the Camera to the original factory settings. After resetting the Camera to the original factory settings, please check the operation of the Camera.
If the Camera continues to display the error E:91 then service will be required.

Regards,
Pacific.

Aug 23, 2009 | Sony Cyber-shot DSC-W55 Digital Camera

1 Answer

Need to reset the date and time.


press the dataregistration button,press set,use the arrows to scroll down to usersettings,press set again,time&date will be displayed,press set and change the date and time.

Jun 02, 2009 | Canon FAXPHONE L80 Laser

2 Answers

Reset to factory original


If you go into the "set-up" menu you should find an option which allows you to reset all the settings back to factory original.

Sep 28, 2007 | Fuji FinePix V10 Digital Camera

Not finding what you are looking for?
Canon PowerShot SX 200 IS Digital Camera Logo

2,788 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

old marine
old marine

Level 3 Expert

2326 Answers

halotheracer
halotheracer

Level 2 Expert

69 Answers

Steven Wander
Steven Wander

Level 3 Expert

595 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...