I took pics with my samsung tl220 b4 i put in my storage card, how do i get them on the storage card after i insert the card?

Did you buy and insert a memory card?
Is the memory card unlocked?
The internal memory is very small and not fit to shoot your pictures.
If you did put in a new memory card, please goto the setup menu and format the card.

Connect the usb cable to the laptop,then select the option Mass Storage mode.then that memory card will be shown as a a seperate removable disk,hence you can access your memory card through that disk.

Hi
Looks like your memory card has malfunctioned. Try replacing the memory card,
Regards.
Javeed

hi,there are two do it your self that i will help on you

* fisrt try to insert the mmc to the pc,when the mmc folder appeared and no dcim folder appeared try to click the tools and folder options then go to view,check the show hidden files.,if the folder already appeared back up the pictures that detected by your computer to the other folder.,and after you backed it up try to format it.,if the formatting run normal.,then try to format the unit in the menu settings,.after that youll need to insert the mmc again in the tl220 then take 2 to 3 pictures.,if you preview the 3 pictures then remove the mmc to the tl220 then copy the pictures that youd been backed up.

*second if you inserted the mmc and the dcim folder was too none highlighted like the other folder, press he right click go to properties - unchecked the read only and hidden - apply - ok to the sub folders and folder - ok..then reinsert the mmc to the unit.,then preview the pictures.,

hope it will help.,

Use the Copy to Card command in the Playback menu. See page 69 of this manual.

Hello

Please follow these steps:

insert card> turn on cam to auto> press review> "reading memory card" > press menu> scroll down to image storage> press ok to select> select INTERNAL MEMORY> press ok

scroll down to COPY> Copy pictures to memory card> scroll down to all> press ok
message to expect: "copying"

when it goes to back the menu screen
scroll to IMAGE STORAGE again and select AUTO> ok> "reading memory card"

This should do the trick.

Kind regards
Andrea

Try this: Remove the card and battery...press all the buttons...leave it alone for 20 minutes...insert the card and then the battery...turn it on

Yes, there is.

Insert the card into the camera. Make sure the storage location is set to internal memory.

Press the Review button, then press the Menu button. Press up/down to highlight Copy, then press OK. Press up/down to highlight an option, then press OK.

Note: this process is actually a copy, not a move. The originals will still be in internal memory. After you transfer the pics to your computer, you can then delete them normally.

To change the storage location, press the Menu button. Press up/down to highlight Image Storage, then press OK. Select Internal Memory and press OK.

try insert new memory card!!or clean you memory card terminals!!

tnx

If you format the camera without the memory card inserted, the internal memory should be erased. Then, making sure the slide switch on the side of the card is in the unlocked position, insert the card and format it. Things should work after that. If they still don't, go into the camera menu and find "reset"...follow the on-screen instructions.