- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
power it off at the mains
hold in usually either the menu button or power on {check out google the exact model }
then apply the mains power
and wait and hold for 15 seconds let go
this will reset the board and clear any faults detections from before {where it came from}
all machines are different in the way reset it applied
some even rotate the program selector back to where they failed
then you can stop it drain it and wait till it opens and then start a fresh cycle too see if the fault is clear
Hi just read your posting.From the information in your posting you mentioned that the rinse light is on when the machine is beeping.Starting from the left to right on the wash progress lights which lights are lit when the machine is beeping,Is it the 1st and 6th or the 3rd and 7th etc?Please reply with this additional information and i am sure i can help you rectify your machine.Looking forward to your reply.
When you replaced the faucets if you mean the solonoids they must be twelve volt.But From left to right tell us what lights are on for a fault code diagnosis.Cheers.
hi any of these beeps that occur outside normal operation are normally indicating an error picked up by the processor and most times requires service you could try switching off machine and unpluging it for a couple of minutes then plug it back in ,this ill ussually reset any memery faults if they are able tobe reset
cheers grant
×