Our Toshiba was working fine and now it wont turn on and the red power lite keeps flashing. I have unplugged it several time, and it will work for very short time and then it will quit again. Red power light continues to flash. Help!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi,It sounds like an issue with the board that powers the lamp it's called the ballast.When you put a new lamp in it takes more voltage than the old lamp ,so the ballast when it starts to go weak it wont be able to power it.The cost for the ballast is less than the cost of the lamp and it could be done by yourself,you can find instructions on youtube.Have a bless one!
This unit shouldb e flashing a repeated count on the standby light. That count will indicate the circuit in which a problem was detected causig the shutdown. Please post that count and we should be able to provide details on the repair.
Pull the three connectors to the yokes on the convergence board. If the set powers up, it's a good chance the STK392-110's need to be replaced. I fixed one today, and it has been running for 6 hours now.
I had the same red blinking led problem on my Toshiba Theaterview tv. I resolved by: - Unplugging the tv. - Press several times (3 or 4 times) the tv Power button. - Plug the tv back in and press the Power button once to turn the tv on....tv worked!!!
I've had the problem before and tried unplugging the tv for a couple of days and that had also worked, but I this recent solution seems to be faster. Good luck! Erick