How to change the analog date on a timex indiglo WR 30m watch

hi Janet.
You may also need to change the time when traveling or to adjust for daylight saving time.

1. What to Look For. Locate the MODE button, the SET/INDIGLO button and the START/STOP button on the side of your Timex Indiglo WR 30M.
2. Setting the Hours. Press down the MODE button until "TIME" appears. ...
3. Setting Minutes and Date

https://oureverydaylife.com/how-do-i-change-the-time-on-a-timex-indiglo-wr-30m-12421830.html
How to set the time on timex WR30M watch Google Search

http://www.timex.com/info/Product_Instruction_Guides_Downloads

Click on my profile (escapement), then click on Tips and Tricks. There you will find link to all TIMEX watch manuals.Rate me, please.

Click on my profile (escapement), then click on Tips and Tricks. There you will find link to all TIMEX watch manuals.Rate me, please.

Check my TIPS here, and you will find out how to set your watch.

http://www.timex.com/info/Product_Instruction_Guides_Downloads

Use the numbers on the back of your watch and you will have a PDF version of your instruction manual.

Hope this tip helps

R/

David

I pulled the stem out, and presto. Thanks for nothing!

i wind the clock hands forward until the calendar date and week day changes and then i re-wind the hands until it comes to the correct time. when i re-wind the hands, the week day goes back to the correct date and the calendar date does not go back by one day. i don't know if this is the "correct" way to do it, but it works.

On some analog Timex watches with a day/date window there are only two "pull-out" positions on the stem, one for changing the date and one for the time. To change the day you need to pull the stem all the way out and crank the hands through 24 hour periods until you get the day correct. Be sure that you have the correct AM/PM setting (if you are setting the watch after noon you need to advance the hands another 12 hours so that the day changes at midnight)

I second the vice advice...the only thing that worked was to put it in a vice and crank it one more crank then you think is possible. You will hear a little "pop" when it snaps into place. It was the only thing that worked!