I have my LG Flatron l1512 LCD monitor on burn in mode and I can't find the way how to get it to the default settings... Any type of help would be appriciated.
Thanx
Microsoft WINDOWS 7: http://www.microsoft.com/windows/compatibility/windows-7/en-us/Default.aspx?type=Hardware
Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com
Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.
Or www.digikey.com, just make sure to use caps with low ESR, 105c, high ripple current and long life rating such as PANASONIC FM or FC series.
Please leave rating if it helps.
Please post back what you find.
2,083 views
Usually answered in minutes!
Hi
I have a lq 1512s monitor the voltage of power 5 @ 12 is good
But the on LED is off and the monitor is dead.
Please Help
Thanks
Hi
I have a LG 1512s moninotr . The power is good . But the monitor is dead
Please help me
Thanks
×