My laxmark x9350 and vista

Even though the printer says it supports WPA encryption, it does not. It will work if configured for the far less secure WEP.

This is the only answer that I have, unfortunately. The X9350 is a terrible machine.

have used the latest drivers from webite for yours and did u have older printe ron it before this thx nick

The drivers are sadly meant for XP. As of now, I don't think there are Vista drivers that can actually work.

I'm sorry!

Please let me know if this helps. Good luck!

Check the following steps:

1. Scan for the available wireless networks on laptop.
2. Check the network and select the desired wireless ssid which is for printer
3. If is it password protected than proviode the password.
4. Connect to the network.
5. Then print.


**If this works please rate else let me know in case of further help.**

Install printer software and follow the instructions, it'll detect the printer automatically if turned on and set it up properly itself

You may follow the instructions from the manuals:
http://support.lexmark.com/index?locale=en&segment=DOWNLOAD&startover=y&userlocale=EN_US&question=x9350&productCode=LEXMARK_X9350&page=answers&detectedProductFacet=CMS-CATEGORY_REF.LEXMARK.PRODUCTS.ALLINONE.LEXMARK_X9350&searchid=1252463391714#4

Hope it helps you :-)

Hi there
fi yopu go to internet connections and look for the wireless connection right click on it and see if you see enable this device than click on it if not you will need to make sure that there are no other connectons the computer is using for the internet ie dsl ok

please follow the link below to download the driver for your printer directly from Lexmark.

For Lexmark http://support.lexmark.com/perl/support/support.cgi?ccs=229:1:0:0:0:0

use the product selector to select your exact model and operating system.

Hi Levi - if you're looking for drivers/software follow the link below. Just choose your operating syetem and you'll be able to download what you need. If you're having some other kind of problem, just add a comment to this post letting me know the details of the problem and I'll be glad to assist you. Thanks.

http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:1:0:0:0:0

This appears to be a Vista driver software issue- check out Lexmark for any updates
You can also try the followng.
go to--- Start/Programs/Accessories/system Tools/Compatibility Wizard and try resetting the machine to run as XP

You can download the Vista drivers from the Lexmark website...www.lexmark.com / support.lexmark.com
Else you can contact Lexmark and they will ship a cd with the drivers to your door.