My pc camera looks dark

Hi there please follow the steps and let me know the result.
1. Ensure batteries are fully charged & clean the battery connector point in side the battery compartment.
2. Look carefully between the lens and the camera body for any sand, dirt or any damaged etc.
3. Try turning the camera with the lens facing down and shake to dislodge anything stuck
4. Try removing batteries and memory card, wait 5 minutes and refit the battery only.
5. Now turn on camera( with out card ) and see ,if working then fix the memory card & again turn on the camera. If working then fine . Otherwise format the memory card and fix back in camera again & try. Make sure before format the memory card take a back up all photos in your computer then format. If no luck then reset or restore the camera setting by pressing Menu key for 2 sec .. in not done the press both Menu & self time key for 2 - 4 sec.
i hope it will gives you success.

This looks like a backlight problem. Every LCD has a backlight the older ones have Fluorescent lamps and newer ones have LED.
Most probably your laptops screen is equipped with a fluorescent lamp.
You may need to replace the backlight or the inverter of the screen.
I would not recommend doing it at home because messing with a LCD screen can damage it (make it unrepairable) and you might get electrocuted.
Take your laptop to a qualified technician or if its under warranty you might get it fixed for free.
Thanks. Please feel free to contact me for further assistance.

remove the program and driver and reinstall both. one is corrupt most likely. this should fix it. if you have another pc, install fresh on that and see if its ok

i have the same problem

Something probably corrupted your webcam software or configuration. Probably the best is to uninstall and reinstall the drivers and the software.
Please check http://www.pcauthorities.com/pc-errors/how-to-fix-webcam-problems

The drivers should be here: https://www.shopezonics.com/Articles.asp?ID=108

Jules

I just posted a solution to the same problem here:
http://www.fixya.com/support/t978798-help_me_please

try adjusting the settings for your camera like brightness and contrast in the controls.

had you messed with the buttons the brightness has gone down 50%.do check it

I just got this camera for Christmas the only way that I know of how to fix it is to change the exposure manually. If the picture is to bright you need a negative exposure, if it is to dark you need a positive exposure. I have noticed that the auto exposure does not get the correct setting that you need for the lighting.

ISO, controls how much light is allowed in your webcam. You can fix it making the ISO the largest.