Epson Stylus CX6600 All-In-One InkJet Printer Logo

Question about Epson Stylus CX6600 All-In-One InkJet Printer

2 Answers

Epson CX6600 Only Prints/Copies Blank Pages. Is there a solution other than tossing this Epson produce failure? [email protected]

Posted by dlvacek on

  • IAMWEARY Mar 02, 2008

    Yes, I have the same problem. Changed ink. Rebooted the computer. Turned printer off and unplugged it. Changed settings in Word 3. Nothing worked.



2 Answers


  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 59 Answers

This is a common problem with Epsons. With Epsons, they have a printhead that lasts for the entire life of the printer. These problems usually occur when you change cartridges and put fresh ones in and it does that charge. There is a long tube that goes down to a big pad that all waste ink drains into. Eventually, the ink hardens and builds up, plugging the tube. The worst thing you can do is clean the heads. My advice is to buy new, or have a repairman clean the heads with hot chemicals.

Posted on Mar 11, 2008



If your going to buy new you might aswell try cleaning them yourself first!

Posted on Mar 31, 2008


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:


Hi there, I have an Epson TM-T20 printer at work. It prints endless streams of blank paper. I have to turned it on and off to stop printing but the problem still continues. What can I do?

The Epson printer printing blank pages, when your printer has:
·Improper cartridge Installation
·When the print head congested nozzles
·Outdated printer drivers

You can fix the Epson printer printing blank pages' issue:

·Restart the printer
·Fix empty or improper installed cartridge
·Update printer drivers
·Clean printer print head

Read more steps to
resolve the issue Epson printer prints blank pages.


Hello my Epson Stylus CX6600 is printing out blank pages, ran nozzle check and Head cleaning, also head allignment, still print blank pages, need help please

if the printers been sitting for some time, the printhead has dried up "not good" printheads generally retail around $100, you can try soaking the bottom of the printhead in metho which may fix some colors but you would be pretty lucky to get all them to work.

Epson stylus c66 is new but in printing paper comes out blank

Normal 0 Normal 0 Driver could be corrupt.
Disconnect the printer or at least be sure it is turned off. I'd do both and reinstall the CD software program that came with the printer. When the software program asks you to connect the printer to the USB port, do so and it should again work properly.
Hope this helps. Bud


CX6600 Epson - prints blank pages

If the Nozzle Check Pattern page prints correctly and completely, the problem may lie within your software settings, the interface cable, or your computer.

To remove and install only the Printer Driver for your CX6600, please perform the following steps:

Driver Removal

1. Go to START then SETTINGS and click on CONTROL PANEL ( START and CONTROL PANEL in Win XP) and double-click ADD/REMOVE PROGRAMS.
2. To remove the printer portion select EPSON PRINTER SOFTWARE and click on REMOVE. Ensure the correct printer model is selected on the uninstall utility.
3. Click OK and follow the prompts. If asked to confirm removal of any personal settings or shared files, click YES or OK.
4. Once the components are removed, power off your unit and disconnect the USB cable.


1. Go to
2. Under Welcome to Epson Support click on ALL-IN-ONES and select FLATBED and then your Stylus model name. Under the Drivers & Downloads section select WINDOWS.
3. Download the most current driver for your printer and operating system.
4. Follow prompts through survey and license agreement and downloading will begin. When prompted, choose to SAVE this file; SAVE it to your desktop so it is easy to find.
5. Once download is complete, close your internet browser. To install simply double-click the file you downloaded and follow the prompts.
6. Do not reconnect the unit until the point in the printer driver installation where you are prompted to check that the unit is on and connected to the computer. Installation should complete automatically.


Cx6600 printer problem

if you left your printer for two weeks or more without using, the print heads may be stuffiness. In this case (aparently yours cases) you must take your printer to a authorized service, they will can clean (with a proper fluid) or replace the ink heads, if cleaning is not possible.

Printing blank pages

Check out the online guide and trouble shooting for a solution

The manuals,online guide and trouble shooting sections could help you resolve your problem. Contact support has a chat facility on some pages that may help.

Click this Link

Under Select a Product Range
Choose Multifunction Printers4.gif on the webpage1.gif
Under Select a Product
Choose Stylus CX6600 on the webpage
Under Select an OS
Choose the operating system1.gif on the machine where you will install the printer on the webpage
Click Confirm Selection

The manuals and documentation link will allow you to download manuals that were on your CD ROM

you may want to bookmark the online guide, if present, to help with future problems -- that probably was not on the CD

Click the back button on the browser

click the Drivers and Software Link

This allows you to download software files that were probably on your installation CD

Click the back button on the browser again

Trouble Shooting and Contact Support could be an interesting link in the future too when and if you have problems.

I hope this helps

Printer throwing out blank pages....

Assuming have tried the obvious stuff like deleting the printer and reinstalling with the newest driver from Epsons web site and that you have checked all your software settings are correct - then;

This could one of a couple things. The first and easiest to look at is your USB cable. Change it and try printing again. If the symptoms remain then it is most likely to be the main board. This is not something the home user can easily rectify as if a main board is changed you MUST input the head ID into the new board so the correct voltage is selected for the head. The head iD includes a voltage ID. A fraction of a volt off and the new board will kill the head and then self destruct. Spectacular to watch but dreadfully expensive entertainment!

If the main is suspect call a qualified engineer to take a look.
Not finding what you are looking for?


Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts


Level 3 Expert

4362 Answers

Cindy Wells

Level 3 Expert

6587 Answers


Level 3 Expert

85241 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides