Where can I find what the error codes mean? I have a 024 and 025 error code.

means using wrong old and lame scan tools
p0700 means transmission error GENERAL( uSA fed code)
means others are there but not using 2008 or newer scan tools
means missing all those better DTC errors
get the car scanned in a real shop using real tools
no kidding.

missing p17xx codes and more.

The Code won't Delete until you fix the problem. Clean or replace the EGR Valve.

Engine Trouble Code Error P0488 - PartsAvatar.ca

https://partsavatar.ca > Articles > All OBD Codes
P0488 is a diagnostic trouble code (DTC) for "Exhaust Gas Recirculation Throttle Control Circuit "A" Range/Performance". P0488 means that the powertrain ...
P0488 Dodge OBD Error Code: P0488 Lincoln ...
P0488 GMC OBD Error Code: P0488 Mercedes ...
P0488 Chrysler OBD Error Code: P0488 Lexus ...
P0488 Ford OBD Error Code: P0488 Mazda O...

P0488 - Exhaust Gas Recirculation (EGR) System Throttle ...

https://www.troublecodes.net > pcodes > p0488
Nov 18, 2015 - A stored code P0488 means that the powertrain control module (PCM) has detected a discrepancy between the actual position of the exhaust gas ...

VIDEOS as well

https://www.google.com/search?q=toyota+hiace+p0488

..

Error code C0500 and C0501 means Fixing unit's temperature abnormality.

How to reset these codes?

To reset Error codes C0500 and C0501, perform the following steps.

1-Turn the machine "OFF".
2-Press the "STOP" button on the basic panel.
3-Keep the button pressed and turn the machine "ON".
4-Do not release the button, until the machine warm up.
5-After few seconds Error code will remove and machine will reset.Basic menu will show no error on LCD screen.This means error code has been removed and photocopier machine is ready to use.


http://servicekonicaminolta.blogspot.com/2012/03/error-code-c0500-and-c0501.html

lashes 52 and 54 ,you do mean flashes ? What flashes ? Check engine light doesn't flash codes .

P2189: Sys Too Lean at Idle Bank2
P2187: Sys Too Lean at Idle Bank1

The other codes P2189PD & P2187PD are pending codes.. Meaning the car will have to recheck the errors before it calls it an error and sets the engine light on. They are the same codes as the others just the PD at the end means pending.

P0137 Error code Faulty O2 sensor Exhaust leak near the rear sensor

• Plugged catalyst
• Short to voltage on O2 signal circuit
• High resistance or open on O2 signal circuit
  

Possible Solutions

• Replace faulty sensor
• Repair exhaust leak near the rear sensor
• Check for restriction in catalyst and replace as necessary
• Repair short, open, or high resistance on o2 signal circuit

P0141 Error code means Downstr Heated Oxygen Sensor Heater circuit fault - Bank No. 1.

- replacement is needed for this issue.

P0342 Error code means Camshaft Position Sensor Circuit Low Input

P1792 Error code means P1792 means the computer isnt properly programmed so if this code keeps comming back the pcm may need to be replaced

I get an error code of 052 on the A/C control unit in my 2000 Mercury Grand Marquis. Does anyone know what this error code means?

Hi..my name is Keith..and the error code P0442 means...Evaporative emission control system,small leak detected ...and error code P0445 means....Evaporative emission control system,short in purge control valve circuit..i hope this has helped

ok error code 1, look for this error code on your owners manual, toyota cd players give 3 error codes, this mean error code 1, error code 2, and error code 3, they all have different meaning please check owners manuel to see what does error 1 mean i will try looking for you