Installing web cam

1st You download Webcam Driver.
GPT DC 4110 DOWN LOAD
I need to down load my web cam , i do not have the disk , ]
can u send me the software for down load it
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

Try the Microsoft download at:

http://www.microsoft.com/hardware/download/download.aspx?category=ICE&type=LifeCam&sku=68A-00001

Choose the operating system, product and language
You should then be redirected to the correct download.

Good luck, I hope you find what you need there.

Remove the web-cam and un-install any web-cam software on the PC, Now log on to the the official site of microsoft and download the driver software to your PC. Now install the software and then connect the web cam to be detected and installed.

click on the link for downloads:

http://driverscollection.com/?H=VX-1000&By=Microsoft

i lost this software ,so i want down load and install .am i how to do?

Hi

It need to reinstall the web cam.

Visit the Microsoft hardware support page

http://www.microsoft.com/hardware/download/download.aspx?category=ICE&type=LifeCam&sku=68A-00001

Fill in the details and click 'GO'

Click on the link:-
"Microsoft LifeCam Readme and Troubleshooting Information"

All the information you require should be found here, Including the latest software to download and Customer Support
Check out any additional software you have to download as well as the Lifecam.

Procedure
Close all programs while uninstalling - downloading and uploading software
Disconnect your webcam
Uninstall the current webcam software on your computer
Restart computer
Download the Installation package from Microsoft
Run the installer and choose your options when prompted
Connect your webcam when prompted.

Install the software first and follow the on-screen instructions. During software installation, you are prompted to connect the web camera's USB cable to the computer's USB port. Then you can mount the web camera onto your computer. Plug the microphone and headphone cable connectors into the computer's audio jacks.

Visit the microsoft hardware support website - enter your webcam details and go to the support page for your model
Read the links for any clues to your problem

You may have lost some support software when you had the virus - try and find out what software you need to run the webcam - contact Microsoft if necessary

uninstall current webcam software
disconnect webcam
restart computer
download from here

http://www.microsoft.com/hardware/download/download.aspx?category=ICE&type=LifeCam&sku=68A-00001

Yes mame i understand.please go to http://www.microsoft.com/hardware/digitalcommunication/Productlist.aspx?type=LifeCam after uninstalling old drivers.find your cam and download freash drivers.reboot after plugging cam back in xp will recognize new hard ware and load the drivers.If this was helpful please vote.thanks and happy holidays.RICHARDM69

hi there

you can download your webcam software here...


http://www.veo.com/Stingray/drivers.asp
includedin this page is your software for veo.

hhope this helps