Question about Audio Players & Recorders

Hi all, I have a MK MX-2000 sub that no longer works. Appears to power up but no audio. I've verified the two internal fuses are fine as is the power transformer and DC rectifier which provided about 45 VDC to the amplifiers. Hate to replace the how Sub and would like to fix it. I'm trying to locate a schematic. Anyone familiar with these? What would be common failures? The unit takes both L and R inputs and since there is no audio I figure something common to both channels is faulty. Any input appreciated

1 Answer

David Dunn

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.
Master
8,546 Answers

The sub is common to both channels. So is the source and its configuration regarding Low Frequency steering.

Have you established that there is audio programming coming onto the sub?

If you suspect something upstream of the sub, try one channel at a time, swap them, whatever. Feed it with a different channel to see it that makes a difference.

Posted on Feb 14, 2010

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0 Answers

HK AVR 247 no power up

Sep 19, 2016 | Harmon Kardon Harman Kardon H/k Avr20 Mkii...

0 Answers

Pioneer Subwoofer s rs3sw does not switch on. The green light does not turn on. The switch on the back is turned on. All other speakers & receiver working fine. Any idea why the power led on the sub would...

Oct 04, 2014 | Audio Players & Recorders

1 Answer

8" compact subwoofer not working it was installed

post more information about your amp. its likely the vibrations moved something in the amps, or buttons.

Oct 10, 2013 | Alpine Swe-1000 8" Compact Subwoofer...

1 Answer

Planet Audio PX1500M Amplifier Problem

Check the FUSE to ensure that current is not cut off.

Jul 16, 2013 | Planet Audio PX1500M - 1500W MOSFET...

1 Answer

The speakers work fine apart from the sub component has lost all volume u can hear it very faintly if u turn the volume to full and the bass control to max. I've taken the sub apart to some extent...

Appears that the map powering the sub woofer is fubar. Those amps take a beating usually from being over driven. Transistors are not like tubes that will just reach a limit, distort, and stay there. You push a transistor and it will self destruct since it knows no limits ala evel knevil.

Sep 20, 2017 | Creative Labs i-Trigue 3400 Computer...

0 Answers

My Harman/Kardon woofer is not working as it supposed to for the last two days now, Normally when I turn on my receiver the yellow light turns to blue but now even if the receiver is on and sound is going...

Jul 31, 2017 | Harman Multimedia AVR 245 7.1 Channels...

1 Answer

Pioneer GM-7200M Car Audio Amp appears to fine but wont work

check the rca input leads are ok

Dec 30, 2009 | Pioneer GM-7200M Car Audio Amplifier

1 Answer

Internal 5 watt fuses keep blowing when I turn on the unit.

hello the reason for that is there's a dead short somewhere it could be a transistors also check the diodes as well but make sure the power's off
good luck

shaun

Oct 17, 2009 | Sunfire True Sub MK II Subwoofer

3 Answers

Pyle PLA885 amplifier blows 25amp fuse. Ideas?

signs of a short, did any wires touch while you where hooking or un hooking the amp? if not then the internal power supply probably has a short in it and needs to be repaired. you can swap the fuse for a good one and hook it back up and make sure you don't touch any wires and if it blows it again then your issues is internal and will need repair if it doesn't and everything seems fine then wires could have touched or the amp was ran past it's limit and blew the fuse to protect it self. good luck and ask any more question you have

Sep 24, 2009 | Pyle PLA885 Car Audio Amplifier

1 Answer

Amp light is on but doesn't put anything out to my subs

if you are sure its the amp. the problem is internal. but if your not sure, try a different stereo or source of sound to the inputs of the amp. if there is still no sound than it is the amplifier and it could be a number of things.

Jan 07, 2008 | Alpine MRP-M450 Car Audio Amplifier