How to install motorola bluetooth headset HS810

1. Press and hold the Multifunction button in the middle of a boom headset while the headset is closed. The light will glow blue.
2. Open the boom microphone and the blue light should remain on. If not, repeat step 1.
3. On the cell phone, press Menu > Settings > Connection > Bluetooth > Handsfree > New Device
4. Select HS810 once a connection is detected.
5. The passkey "0000" is now entered to confirm that the connection has been made.
6. The cell phone screen will now read "Bluetooth Connection".

Auto Accessories

the default pin is 0000 unless you changed it.

On your phone, make sure bluetooth is turned on (settings, general).

While your phone is in discovery mode, turn your bluetooth device on and put it in discovery mode (usually you have to hold the power button for 7-10 seconds).

Your phone will find the device, and you will be prompted to enter the devises PIN number (often 0-0-0-0). Your phone should pair with the device then.

Try '0000' (four zeros), which is the code chosen by the vast majority of bluetooth devices' manufactures.
I was able to find the user guide for the H710 headset, but unfortunately not for the H715. It's here, anyway. Hope you find it useful, somehow.
Cheers! Carlos

flib the mike boom to fold, press on the large center football shaped button until glows steady, then open the boom should stey stedy lit, scan for bluetooth with your divice it will receonize it!
Capt B. Ricciardi

Male sure before trying to find the bluetooth headset with your phone that the bluetooth headset is off. Hold down the power button until the led stays on. Then quickly use your phone to fetect the headset. If it will not detect the headset while the led is solid on, then it is not compatable with that phone! Good Luck and Thanks for using FixYa! Please rate if this was helpful or not!

hs810 how do I reset

here the steps, first you have to open your BT to pairing mode by close your boom and hold the button untill the indicator light show(not flashing), when u see the light DO NOT release the button, open your boom the you can release the button after that open your phone bluetooth then choose search for device there should be your BT(HS810) on the list then pair it.

i'm not good in english but i'll try. i used h-700 which i think they are same, you have to close your boom(BT) first and and hold the call button for few secs then open the boom while the light is show(still push the button) then release the button then you open your phone and open bluetooth menu choose search for device, your bluetooth should appear on the list.

this post is quite old but i think i'll answer it...first of all your phone must have bluetooth. to use it you must pair your phone with your bluetooth headset first. Open your bluetooth headset in pair mode and then open your phone bluetooth pair them and they will auto connect after you paired them(usually).