Onkyo SR606 - Issues with video on component connection. Wii works great on other tvs but not via the receiver. Audio works great but no video.

Hello, I am sorry about your issue. Did you make any changes to the output resolution on the Wii. The output must be at 480i for the receiver to up-convert to HDMI. If there is a problem with the receiver I suggest a work around by connecting the component [red,blue,green] video outputs to the TV and the audio connections [red, white] to the receiver. Thank you, Onkyo USA

Hello, I am sorry about your issue. It sounds like your receiver needs to be serviced. Thank you, Onkyo USA

Pressed and held cable/sat button on front of unit until "Attenuate" came up. Changed setting from 0 to 2

HDMI has had a multitude of issues and yours is one of them. Your receiver has either 1.1,1.2,1.2a ver HDMI. If it's still under warranty, you can have it upgraded to 1.3b which is the current and working version. So far so good. If it's out of warranty, it's a 200-300 $ repair. If you just use HDMI directly to your TV, providing you have enough HDMI inputs on the set, you can just run optical or digital coaxial to the receiver and all will work fine. Hope this helps.

en order to help out here a few questions need to be asked? Is the CBL/SAT connection VIA HDMI? Some HDMI signals will not pass CC and or On-screen display (OSD) via certain video modes. If all is analog video, not a problem, if mixed with component and HDMI and analog, you may experience issues. Let me know your thoughts and the best of luck.
techhome100

I am experiencing issues like this although with a VCR connected with analog video. I added a BluRay DVD player and all of a sudden I lost my video upconversion from my VCR. I am going to try to reset the receiver to see if this fixes the problem. If not, I don't think it is the receiver issue, I think it may be the fact that enorder for video to pass through HDMI, allot of criteria needs to be met. Certain Handshakes need to happen, especially with the HDCP issues. Most likely I will connect a separate video cable to my Plasma and use a secondary input on the Plasma for the VCR signal. You may want to purchase the Component Video adapter for the wii system as this will provide you with at least 480p and your receiver should not have an issue passing the signal over the HDMI output. Good luck and give me an update.

Not sure if this is your fix, but I had what I thought was the same problem. I played with my Onkyo quite a bit ensuring the correct assignments for HDMI, audio and all that stuff. Turns out I neglected to make sure the output devices were properly assigned. Many devices aren't default to output sound over HDMI. I changed the audio out settings on the cable box to HDMI and suddenly the Onkyo worked great. I know, I'm an idiot for not checking that in the first place, but maybe someone out there is having the same trouble as well.

alot of times , you need to go into the bluray menue under audio, and make sure audio output is set to hdmi, and not componant

See www.avforums.com/forums/onkyo-owners-forum/696423-faq-setting-up-ps3-onkyo-amp.html

This should give you the info to set up the ps3.

Hi there. for your receiver, the only time it can upconvert is when you go out as HDMI. In your current hookup (component out to tv) the signal from your cable (using a composite) will not be able to pass through the component cable. This means you either have to hook up your cable box using a component cable as well or add a composite cable (yellow) from monitor out of the receiver to the tv. Page 22 of the manual will show a diagram of the video signal flow. hope this helps.. ^_^