At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Colors blurry?Misaligns colors,3D colors?Ur convergence is dead.Must replaced 2 Convergence ICS,and some or all the resistors.The shop will cost u $300 for parts and labors.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You need a new bulb. It's easy to install. Remove the lower panel. Remove the 2 screws that hold the buld casing. Remove the bulb and replace with a new one. Replace the screws then the lower panel.
What you are seeing is asbestos insulation inside the crt tubes that has come loose or flaked off and is interferring with the scanning beams. The only remedy is to replace all three crt tubes.
I Have A
Samsung rear Projetion Tv Model No. PCJ522R
i was cleaninthe inside when i spilled oil on half of the board power supply,when the tv is connected power button is light up but wont turn on,what can i do?
This sounds like the solder joints on one of the convergence output IC's have cracked loose or the IC itself is defective and quitting when it warms up. The IC needs to be either resoldered or replaced.
×