After replacing ink, printer doesn't allign properly or print at all

Try to do the Deep Clean Printhead function on your printer. On the printer touchscreen, touch Ink Levels > More Options > Deep Clean Printhead. Your printer will then print a test page forcing ink through the cartridge nozzles and clean them. Try to print a document again to verify that the problem is fixed.
If that doesn't help, please contact the Lexmark Technical Support Center or point your browser to http://bit.ly/lFKDzs for online technical assistance.

Hi

Firstly you should check if there is any covering on the ink nozzles
Did you try to allign the print catridges after you changed the same.
Take out the catridges and clean it with a piece of cloth again put it back and check
if still it doesn't work
If you have done it perform a semi full reset:-
Unplug the power cable at the back of the printer
Press and hold down the (#) and the (6) key together pplug in back the power cable
Leave the keys it should say on the screen semi-nvm reset if it doesn't says so its not done properly .. try to do it once again after that it should align the catridges automatically
This should solve your problem if not try with a different catridge

it is problem with he paper pick up assembly unit.

A manufacturers default of printing an allignment sheet after the jobs been completed. The reasons are to indicate to the user ink conditions that is available when any print after all is observed on the complementary printed page. The functionality of the print allignment page could be disabled by manipulating the printer menu functions. the process may require removing and installing the ink cartriges for the option of allignment to be manipulated.

Put new ink cartridges in printer and will not allign properly, what should I do? Alreadsy printed the allignment page and it is off.

Most times inks can go expired and prints partial,get another ink and replace it.

make sure you don't have a sticky button on your printer that is always sending an allignment printout. otherwise, uninstall the printer and re-install it again. try resetting the printer also

actually it is given in that allign page printout that how to stop this.
but listen the procedure.
after the allignment page is printed just place that allignment page in the scanner .the readable side of the page on the glass.then press OK/ENTER what button present in your printer.
the allignment will start.the printer will read the page.and allignment will get completed.then after u ON the printer it will not give you such problem till u replace the cartridges.

hello..

You may be need to buy a new color cart., becuase the allignment page depend on the Yellow color when it become to scan..

or you can pring any allignment page from a friend and put it in the scanner instead that one you printed out....

Hope it's work
Yasser

if the black never print anymore but that is new clean the printer head.or go on start programs click printer or faxes, installed will appear right click on the printer name proterties go on service then then box will appear u can their the word allign cartrigde an clean.