Block websites on cisco asa 5510.

Hi,

Its simple, you have reboot with console connect, get into to ROM mode and change configuration registry so it will not load the saved configuration. Please refer Resetting the passwords on Cisco ASA 5510 Binary Royale Ltd for the step by step process

I know that iKeyMonitor can also block sites on iPhone/iPad/iPod now.
http://ikeymonitor.com/

****

Your best bet is to place the ASA into 'transparent' mode, and letting the traffic pass through it and be inspected on the way through.

To do this you need to first do the following command:
firewall transparent

Once in transparent mode, the firewall will no longer look like a hop in the packets journey, and you can set rules to allow/disallow traffic using access lists on the inside and outside interfaces, plus you can perform packet inspections using policy-map and inspects.

Hope that helps!

connect your laptop to the asa5510 using a cross over cable

Yes. The firewall will restart. Just be sure to save your running config to memory before turning off. For that you must issue the command: write memory.

Best Regards,
T

This is the best doc. I can find to help you with your problem.
https://www.cisco.com/en/US/docs/security/asa/asa70/quick/guide/70_ASAqk.html#wp46243


Please let me know if it helps...
Tim

Hello kuniksh,

Look at the below link for all configurations
http://www.akadia.com/services/cisco_router_firewall.html


Do rate this solution!!!!

If you can't get the manament working initially I suggest the following

Setup a console connection
Type "enable" and press enter to access priveleged exec mode on the ASA
Type "config terminal" and press enter to access configuration mode
Type "configure factory-default" and press enter to load default settings.
Assign a static IP to your PC of 192.168.1.5 and try to browse to https://192.168.1.1 (PC is plugged into management interface)

You should be prompted to begin using ASDM