Question about Kirby Ultimate G Bagged Upright Vacuum
There is a portable shampooer/sprayer that attaches to the hose ( the long one that makes the kirby a canister vacuum). It should have come with your attachments. Looks a bit like a gun without the tank attached to the bottom...the tank screws on.
To use it you would put the fingerguard attachment on the front of the kirby where the powerhead would normally go and the hose with the portable shampooer where the bag would go.
The tank on the portable sprayer/shampooer has lines to indicate how much water and shampoo are needed.
Be sure to put the mesh nozzle (sort of a triangular shaped thing with a piece of mesh along the front that attaches to the front of the portable sprayer) on the front of the portable sprayer if you want to shampoo..otherwise it will just spray a mist. The triangular piece with the mesh screen is what produces suds.
Vacuum the furniture/stairs thoroughly before shampooing. Cover the stairs/furniture with a thick coat of suds. Once covered with suds, pop the suds into the fabric/carpet using your hands...working the bubbles into any heavily soiled areas with a soft brush. No need to vacuum after shampooing. There is only about 10 percent water to 90 percent air in the suds.
Then let it dry. 15 minutes to and hour depending on the amount of solution used. Hope this helps!!!
Posted on Feb 24, 2008
Tips for a great answer:
Sep 01, 2011 | Electrolux Floor Pro Vacuum
Aug 30, 2009 | Kirby Ultimate G Bagged Upright Vacuum
Jun 11, 2009 | Bissell ProHeat Turbo Deep Cleaner Upright...
Mar 24, 2009 | Kirby G5 Bagged Upright Vacuum
Mar 05, 2009 | Kirby Ultimate G Bagged Upright Vacuum
May 08, 2008 | Kirby Ultimate G Bagged Upright Vacuum
Feb 14, 2008 | Kirby Ultimate G Bagged Upright Vacuum
Nov 06, 2007 | Vacuums
Feb 04, 2013 | Kirby Ultimate G Bagged Upright Vacuum
1,308 people viewed this question
Usually answered in minutes!