Question about Kenmore Dryers

1 Answer

My Kenmore 80 series gas dryer will turn on but won't spin

Posted by triciacooper on

Ad

1 Answer

Victor

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,136 Answers

Hi, Sounds like the belt broke.
UNPLUG the dryer. This model you need to remove the two screws under the lint screen. Now use a flat blade screw drive and insert it in the gap between the top and the front panel and pry the top up. Now locate and remove the screws on the inside of the front panel in upper corners. The front should lift off.
There should be instructions that came with the belt. I will try and explain how this goes on. The idler pulley fits in a slot right in front of the motor. Put the belt over the drum with ribs touching drum. Now, thread the belt through the idler pulley wheel and bracket and set the belt on the motor pulley. The ribs should rest in the grooves on the motor pulley.
I hope this helps you. If I can assist you further, please let me know. Please rate me performance so that others as well as myself will know how I am doing.

Thanks
Vic

Posted on Feb 12, 2010

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore 80 series washer won't spin or agitate


check to make sure the belt hasn't come off. if it's direct drive make sure the shaft is working and moving freely. if all of these check out the motor that turns everything my be stuck, frozen up or just bad all together.

Jul 14, 2012 | Kenmore 24032\24036 Top Load Washer

1 Answer

My series 80 Kenmore dryer won't start


Hi,

There can be many reasons why your dryer will not start or turn...

The most common causes are the belt breaking or jumping off, or the motor goingbad...

Here are a couple of tips that I wrote will help you to figure out why yourdryer will not run...

Dryer Repair - The Dryer is not Turning

Dryer Repair - The dryer will not start


heatman101

';';

Jul 30, 2011 | Kenmore 800 6983 Electric Dryer

1 Answer

I have a Kenmore 80 series gas dryer. Dryer heats


The belt around the drum has come off or broke. The front of your dryer will have to come off to inspect

Feb 04, 2010 | Dryers

1 Answer

Kenmore 80 Series Gas Dryer won't run unless empty


MORE THAN LIKELY YOUR TENSION PULLEY IS SHOT WAS IT MAKING ANY SQUEEKING NOISES

Aug 26, 2009 | Kenmore 73952 Gas Dryer

2 Answers

Kenmore series 80 Gas Dryer: No heat


ck the thermo fuse then ck the gas valve for power and the igniter to see if its broken probley igniter if you dont see a glow comeing from it

Mar 18, 2008 | Dryers

Not finding what you are looking for?
Dryers Logo

Related Topics:

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dryers Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3053 Answers

Ned Halaweh
Ned Halaweh

Level 2 Expert

240 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...