Question about Mitsubishi WD-52525 52" Rear Projection HDTV
Check the lamp door to make sure it is seated properly I believe the red light indicates door switch problem. It shows you lamp error data in the service manual.
Posted on Feb 10, 2010
Tips for a great answer:
Oct 19, 2012 | Mitsubishi Televison & Video
Aug 01, 2017 | Sony Televison & Video
Mitsubishi TV troubleshooting
Here's something that might also be useful. After you turn on the set, and get the regular red blinky lights, hold down the Device and Menu buttons together for about 5 seconds.
The Power light will start to flash in a two digit sequence.
For example, 3 flashes, then 7 flashes = 37.
Here are the error codes, and the corresponding problem:
12 = No error detected, check power supply.
32 = Lamp Cover is open.
33 = Air filter cover is open.
34 = Lamp abnormality
36 = Light Engine (DMD or Lamp Fan stopped)
37 = Exhaust or Lamp Ballast Fan stopped
38 = Lamp Temperature High
39 = DMD Temperature High
41 = Short is detected
44 = DVI cable between FMT and Engine disconnected
Jul 17, 2012 | Televison & Video
Sep 10, 2011 | NEC VT700 Projector
Mar 25, 2010 | Sony KDF-50E2000 50" HDTV
Mar 20, 2009 | Eiki LC XNB4 LCD Projector
Nov 26, 2008 | Televison & Video
Dec 26, 2007 | Panasonic PT-50LC13 50" Rear Projection...
Nov 06, 2007 | Sony XL-2100U Projector Lamp for...
445 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: