At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The F10 code on a Kenmore oven means that the oven is overheating - the oven is detecting a temperature far over the safe range of operation. Most models also start beeping when this happens since it can be a safety concern.Apr. 14, 2020
Hello Edgar, The F10 error code means that function key (bake/broil/clean ect) on the touchpad is defective. Sometimes just making sure that the ribbon cable on the touchpad is connected tight into the control board. The error code could be cleared by pushing CANCEL/OFF button..if error code returns the touchpad would need to be replaced.
Sorry to read about your problem Your F10 code means Runaway Temperature and f30 means open probe connection. try this and see problem comes back. 1. Unplug the unit or turn the circuit breaker off for 60 seconds. 2. Now, restore the power to the appliance by plugging it back in or turning the circuit breaker back on. 3. Check to see if the error code is still displayed on the range.
Note: General information for resolution to this problem, is based on information provided in question. Contact certified technician if problem persist. Sears Repair 1-800-469-4663
I have tried to help you.Pleas help me by Vote/Rate my response. Thanks.
If you are in the Denver,Co area I can help you out.
i phoned Sears about error code f13 on a gas range, and was told to unplug the range for 30 minutes. i think she meant 30 seconds - to reprogram the microchip. i unplugged it for 15 minutes or so, then reconnected, and it worked.
×