- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Question edited for a lot more clarity.
Question moved to model category.
Troubleshooting help, but better to take the vehicle back and ask why the unit no longer works?
Unable to receive stations.
• No antenna, or open connection in the antenna cable.
- Make sure the antenna is properly connected;
replace the antenna or cable if necessary.
Unable to tune stations in the seek mode.
• You are in a weak signal area.
- Make sure the tuner is in DX mode.
• If the area you are in is a primary signal area, the antenna may
not be grounded and connected properly.
- Check your antenna connections; make sure the antenna is
properly grounded at its mounting location.
• The antenna may not be the proper length.
- Make sure the antenna is fully extended; if broken, replace
the antenna with a new one
Sorry man here's what i pulled from the internet- Crutchfield sells these: Note: The MRA-D550 requires a compatible head unit for
setup and control, it cannot be used without one. The current list of
compatible head units includes (but is not limited to): IVA-D300,
IVA-D310, IVA-D900, IVA-D901, DVA-9860, and DVA-9965.
Try purchasing a "ground loop isolater", when your head unit and amp are grounded in 2 diffrent locations the diffrence in volatage to ground between the two will cause interference.
Check the below link for more details, can be purchased of a shelf at you local radioshack
http://www.radioshack.com/product/index.... loop&parentPage=search
Hope this helps
L8R
×