With the above problem it is found in the internet that I have to install 'wvdial' and 'usbserial' driver in linux. So my question is where I will get the driver to download and how to configure the same with RHEL.
Linux connectn
1st log in the root user
connect the usb modem
run
terminal in linux
type following command
wvdialconf
/etc/wvdial.conf
wvdialconf will detect the modem
nano
/etc/wvdial,conf
jus replace dis wid defaulf setting
modem-/dev/ttyusb0
baud=115200
dial
command=atdt
baud=115200
dial command=atdt
init1=atz
init
2=at+crm=1
flow control=hardware
username=internet
password=internet
phone=#777
stupid
mode=1
aftr dis open terminal type wvdial &press enter
if
u want to disconnect den press clt +c
kindly revert if u need any help
if ur using tata photon + then plz check properly der is a inbuilt software in photon modem if u cant find den follow dat above method
1,782 views
Usually answered in minutes!
×