Programming for the motorola sk-900

Here is a link to the user manual
http://content.giantintl.com/manuals/Moto/SX800_UG_30June.pdf

Hi Ricky,

You need help programming your Motorola HT1000 to scan.

This is tricky, but I may have the solution you seek.

Join yahoo group Specific to your radio Make/Model, the team there will help you find the answer, plus you can download manuals, diagrams and other goodies (if available), for your radio, all this is free.

I hope your query has been satisfactorily answered.

Regards,
Peter

Yes. Put the radio in programming mode and walk though the programming steps. The Privacy Tone is referred to as CODE in the manual. Here is a link to the manual http://www.banoggle.com/Products/Motorola/manuals/CLS-series-manual.pdf. Programming instructions begin on page 28.

Best regards.

I don't think that you could program/change the freq of your Motorola GP2000 manually since newer Motorola radios today everything is done by computer and programming sotfware. You need to have software for GP2000, radio interface box ( RIB) and programming cable for GP2000 radio and these devices are not cheap. The best way is to contact a local repair shop to have it done for you or find a two-way radio technician, he could do this if he has all the test equipments required.
Good luck!

Radcom907

Check your programming. Program the frequency, code and Qt filter (if any) to match one another.

The Talkabout is a user programable radio. You will need to put the radio in the programing mode and program it to the other radios.
Go here for the manual.
http://www.motorola.com/mdirect/manuals/SX700_userguide.pdf

The GM300 is dealer programmable using Motorola proprietary software, a programming cable and radio interface box (rib). (Or on some models a ribless cable). I will continue to look for a user guide pdf. If I locate one I will post it.

I hope you are in the old dos program, Just open your c:\mrss\ht1000\archive file and delete away in DOS. Keep a few vhf, uhf, low band 800 & 900 mhz archives just so you have something to work with in case you blow up a radio while programming. If you want to keep it all just hook up a old ZIP drive and copy everything. Good Luck
radio-trader-bob

Hi,

A Motorola MTS2000 is a government issue 2-way radio, hence user manuals are restricted. You can try ordering them with Motorola (800‑422‑4210). I was made to understand that manual part number starts with “68” and ends with a “-O”. Version would depend whether you have the I, II, II versions in either VHF, UHF, 800 or 900 MHz.

Since this is your 2nd posting of this model and based on your profile however, I would assume that your requirement is technical in nature (field programming, repair, maintenance, etc), perhaps a Service Manual would fit you better.  It is available   here in pdf. A Spec Sheet is  here  likewise in pdf.

Hope this be of some help/idea. Post back should you need additional information.

Good luck and kind regards.

here is a link to the manual for your radio (english http://myweb.accessus.net/~090/bearcatting.html#motoman They do not give out the information of how to program it, only authorised technicians are permitted to do so. Here is the link to motorola customer support in Puerto Rico https://www.motorola.com/pr/feedback.jsp They should be able to tell you where you can get your radio programmed, and what programming is permitted in PR. Hope this helps :)