I have a problem with my Epsom Stylus Photo 2100 that it will go through the printing motions but the sheet of paper is blank afterwards. I have changed all the cartridges (expensive) and I have cleaned heads but to no avail! Any advice please

Check the ink levels (sorry, had to say). Runthrough clean print head cycle, Then chk printer settings for the settings you made or want.unchk thre spacer sheet box._good luck_Ned.

Try few steps as given below...

1. poor quality printer may reduce printer quality & causes paper jams and other printer problems. If you encounter problem , switch to a higher grade of printer.

2. Do not load curled and paper folder.

I hope, it helps.

Feel free to get instant printer help at http://www.vtechsquad.com/printer-support/ to fix any printer issues.

To help complete the pattern, feed copy papers to the printer and do atleast 40 blank photocopies and afterwards clean the head and check the nozzle.if it has not improved, repeat the same procedure until the pattern completes.mine also had the same problem but after doing that, it was solved for good.
NB: Command copies without putting any printed paper to save ink.

is it going through the motions of printing or is it just dumping the paper?
Check your print file to error if you have an notice

Your printer cartiage will be out of ink.

Or it will be dry cause of not used from long time.

Change the printer cartiage may fix this problem.

Thanks.

The Epson Stylus Photo R210 web page is at

Cheers

Bernice

pls need help icant print i only see blank sheet of paper

Hi

Go to control panel, click on printers, look for stylus c46 icon, right click and cancel all documents. restart your computer afterwards.

Thanks for using fixya!

Follow these steps to set up your Epson product and install the built-in Windows Vista drivers:

1. Set up your computer.
   
2. Connect your Epson product to your computer.
   
3. Follow the on-screen instructions that Windows Vista displays to guide you through product driver installation.

You need to use a program that can do printing multiple pictures in just one click.

Care to let us know what the error message says, or so should we just pick one from the air?

Not printing at all: does that mean it goes through the motions of printing - like feeds paper, head moves back and forth but paper comes out blank or that it sits there like an ornament no matter what you do?

If you give no information about the problem, you will get no answers.