Dear all,
Whenever i give a print command,the command goes without the error but do not print.The ready light do not blinks when starting the printer also.It glows only.And also when opening a printer cover or when removing the Cartridge(Toner),the attention light do not blinks.No error.PLease help me.
Just inspect your printer's front cover.there r two plastic stick which is attached with the printer cover.this two stick hit the two particular point.
1.power switch conector(left side corner)
2. scanner sensor conector(right side middle)
i think your left side stick may be broke try it.
Try to install your printer on another pc, install dot4 printing support drivers for usb form printer driver cd. take test printout. if problem continues test your printer at nearest hp service center.
Thank You.
My suggestion? get new drivers
www.hp.com
and does your computer have backup?
452 views
Usually answered in minutes!
thanks buddy,reinstalling the driver worked out.Many Many thanks.
×