No pic on monitor. connected everything to computer and no picture on the monitor

Firstly disconnect all the cables from the monitor if connected any, in short monitor should not be connected to any devices. Then press and hold the power button of the monitor for 15 secs and release it. Then try to check it. If still no picture, then try to connect it with another monitor. If still no pic, however you are able to see"no video cable" displqayed on the monitor when its not connected to any devices then the monitor is fine, may be your graphic card on your computer is bad or not working. Please get it checked. Thanks

If its just your computers then I would say its your monitors. If its everything you look at your pics on, its your camera. Need more information to help you.

Check connections are good. Check pins in plug. Check with another monitor. Check with another cable.
If all tests are satisfactory then replace faulty monitor. End of life!

Hello,

Check all the connections to the monitor, ensure they are all intact, replace any cable suspected to be damage and see if there is difference, if no difference, this indicate that the picture board on your monitor is bad, since it goes off after few seconds and the power led or button is on, it means the picture board of your monitor has developed fault.

The best thing for you to do now is to take the monitor to a local repairer within your vicinity to help with the replacement of the picture board because the fault is not something you can fix yourself, in order not to complicate issues.

Take care.

Hello,

The picture board of your monitor is malfunctioning since you the power led button is on and all connection are well connected, it means the picture board of your monitor as developed fault.

The picture board of your monitor is bad and will need to be replaced.

The best thing for you to do is to take the monitor to local repairer or any service center within your vicinity to help with the replacement of the picture board because the fault is not something you can fix yourself in other not to complicate issues.

Take care.

Please ensure that the input settings for your monitor match the input (VGA, DVI, HDMI, etc) you have connected from the monitor to your PC. Also, if you are having memory issues and one of them fail, it could cause your computer to stop booting up, or to show no image while booted up like this. If you feel comfortable doing so, remove the case and take your memory out one at a time, checking the issue with both memory sticks by themselves. If this doesn't work and the input setting seems correct, let me know and we will move forward.

Good Luck,

Jesse

• check the connections, make sure everything is in tight and right
• if you can unplug the monitor cable, and try it with a different computer, if it doesnt work then you need to buy a new cable
• this is most likely a connection problem so check and test all connections

CHECK CABLE CONNECTION TO PC...TIGHTEN IF NECESSARY...IF THAT DONT WORK TRY A SEC MONITOR IF CLEAR U HAVE A BAD MONITOR...IF BAD PIC..THEN U HAVE A BAD VIDEO CARD ON PC

Double check all of your connections. It appears the video cable is not plugged in completely. Try another monitor if possible to see if the computer is actually outputting video.

Try to delete that picture you downloaded in the first place and then reboot the system.