Need code for sat receiver opticum 4000 ts for remote one for all 3445 ROO

If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" view. It will make surf easier.
http://electrohelponline.blogspot.com/

018,010,013,019. Try these codes. For more information check this link. Setup procedure, and setup code list to many popular remote controls are given. Pull up older posts.
http://electrohelponline.blogspot.com/

I doubt it exists. (a workable code).

Possibly this reference:

http://www.fixya.com/support/t4235970-need_code_technika_tec_x22d14z99g_860

Question about One For All URC-3445 Remote Control
Open Question
Need code for a Technika. tec-x22d14z99g-860 - One For All URC-3445 Remote Control
Posted by awaters2 on Mar 01, 2010

Hi. Yes here is the support site -
http://www.oneforall.com/en_UK/support

HTH
Chas

Hi,

Your remote has lost the code you programmed into it. This can happen if the batteries run down completely before you replace them or if you take too long to replace them. You need to program the code again to make it work.

If you don't know or have the correct code, please post back with your TV brand and I will obtain the correct code for you. If you need codes, please also confirm you are using the URC-3445 remote so I can provide the right codes.

Regards,
BElectric

yes it will not work on tv i have so took it back and contacted logik direct to purchase a new remote

http://tv.manualsonline.com/ex/thread/view/idThread/2155727

not all universal controls work with all brands and makes.....some have a decode code inside and u can enter this code to work with ur remote.....
if not u just have to do it Manuel