Changing greeting on answering machine

This is from the attendant user guide. Don't ask me what a Conference Bridge Extension is though.

To recording your greeting:
1. Set the Supervisor Password, if necessary.
2. Call a Conference Bridge extension.
3. When the Conference Bridge extension answers, dial the
Supervisor Password and #.
16
4. Press * to skip the setting verification mode.
5. Press # to change the system settings.
6. Skip the steps until the Customized Greeting option is played.
7. Follow the voice prompt and record a new Customized Greeting.

read you ins. manual and read how recoder answering machine greeting.

God bless you

I'm kinda new here, but why doesn't anybody say WHAT SYSTEM THEY HAVE????? It's kind of like saying I got a GM car. Uh..... Corvette or is it a Lumina?

ANYWAY, I'm presuming a Partner.

You better hope the previous guys left you the password.

Go to a station, dial 777 to get to the VM.
99# should prompt you for the password. Try 1234 or 1111.
If you get in, just listen for the prompts to guide you.
Good Luck

i think , on panel set the menu button , may have the change greeting option or reset

press and hold the greeting button then you will here a beep then the machine will say record your message after you have finished push the greeting button and your greeting will play back

Get into admin section of voicemail. Select change greeting. Select greeting number (probably 001). Rerecord. Need help. Email. If this is helpful, please post as such

1. Press set button
2. Use next and previous buttons to select number of rings setting and press set.
3. Select the number of rings you want.
4. press set again to save setting.

I hope this helps. Here's the manual:
29869GE2 Digital Answering Machine

Try just pressing down on the greeting button on the answering machine, you will hear the lady say "record greeting" and keep holdong down until you are finished recording the message. When you are done, remove your finger, done!

hold down the greetings button and speak when it beeps

press menu on the base.
use the volume up and down buttons to change to the answ. setup
go to greeting and follow the menu prompts to record a new greeting, then select change to pick which outgoing greeting is played.

you can download a manual from:

http://www.uniden.com/index/manuals_results.cfm?cat=1