HP color laserjet 1600 wonte printe new toner color.

hiii
Its depends on your printing needs.Printing quality almost same these two printers. If u buy hp 1600 u will get more pages than cp 1525.But u should think about the toner cost. Check your local market price for each toners.Here i will give u the toner model numbers for ur required printers.

hp 1600 - q6000- black,q6001,q6002,q6003 each three colours.- Page yield 2500 pages for black ,2000 pages each colours.

hp cp1525- ce-320a(128a),ce321,ce322,ce323- Page yield -2000 pages for black,1300 each colour pages.

So I am sure hp 1600 toner very costly than 1525 toner.If u dont have huge volume printing better i suggest u buy cp 1525 model.Also this model offering wirless printing .
U can refill this toners lowest cost and getting good results.
sooooooo cheeeeeeers up........select your new printer. best wishes..........

Does the printer ever come to ready? If not, have you recently changed any of the toner cartridges? We have had cases with generic or refilled toners that will cause the printer to not be able to calibrate.

Reinstall the old cartrige that you were replacing and see if it is recognized. If it is then the problem is your new cartridge not the printer. Take the new cartridge back to vendor and get them to replace it, which they should do if they are reputable.

check your toners
if your toners are refilled
the drum or the magnetic roll of the refilled toners must be replaced

did you use a genuine toner cart.........!!!!

The ink of your printer seems to be empty. Replace the toner cartriage to solve the problem.

this problem regards the head of the catridge. u have to do clean due to dust it may happenlike that. u clean inside with the cotton cloth on the print head and refix the all color catridges. when u remove ur catridge u have to close all the sides due to avoiding dry.
the second reason when u purchase ur catridges, check whether the catridges are valid date.

200 is not much, but possible if you print a lot of pictures at paper size. Normally when a HP 1600 starts notifying about low toner, you still have about 20 %.

If the line is one specific color, then change the corresponding toner cartridge. (You may be able to see the line on the drum in the toner cartridge.) If the line is a mix of colors, then it is probably either the transfer belt or the fuser. In either case, you could replace the whole printer for about the same cost as repair.

Have you tried changing the magenta and black toner cartriages?