When i switch my navigon 3300 max on it says startup error! please check setup. how can i fix it?

Hi,
I can understand the problem in the unit so to over come this problem you have to send the unit in for repair . Please contact the technical support to send the unit in for repair .They will register your unit problem and they will provied you a Repair Authorization number (RA).You will need a Return Authorization (RA) number prior to shipping your product to Magellan for repair.

An RA number is required prior to shipping your product to Magellan for repair.
Hours: Monday through Friday, 6:00 a.m. to 5:00 p.m. PST/PDT Telephone: 800 707 9971



thank you

if you have a pc, you can use the usb to mini jack and it will charge

my canon ir 3300 shows error e-000007-0000 how can i solve this problem

If you can try taking the battery out and leaving it out to see if that will reset it.

OK, but first try to clear the error under service mode, then replace fixing film assy, for EU 240V is FG6-6041.
To clear the error:
* 2 8 *
COPIER
FUNCTION
CLEAR
ERR
OK
Turn off and on ( main switch )

If this dont help - replace fixing film assy.

http://faq.navigon.com/opencms/common/Download/Manual/PNA/Navigon43xx/English_manual.pdf

Hi Mart136,
Were you able to get XCSoar to work on your Navigon 4310? I have the same problem with XCSoar and my Navigon 2100 Max. I did exactly as prescribed for installation on the XCSoar site but my 2100 Max keeps asking for the Navigon SD card .. it doesn't want to recognize a standard SD card.
Does anybody have any suggestions? Thx Much!

replace hard disk drive

the same happened to my 2100 3.5 inch. any remediatons?

ERROR CODE E000602-0003 what i do