Advantage of (1980s and 1990s) Sony ICF-SW7600

my Sony radio lcf-sw7600 didn't work. jast show the time.

These radios are subject to bad electrolytic capacitors. Need to replace them. Not an easy job but can be done for about 25 dollars plus shipping. Rod ( [email protected] )

I can do the task, the parts are around 25 dollars for all, labor is what time I would have in it. Email me for more details...... [email protected]

Could be a diode or a capacitor. Where are you located?

Manufacturer Sony Part Number 1-467-906-11 Description ADAPTOR, AC try go to Radioshack sorte or
http://www.radioshack.com/home/index.jsp

Yes, its discontinued item.
You can try it in ebay or some thing.

Hi,
Seems speaker voice coil is not working due to stiffness and its irreparable. You should replace speaker of radio as per following part number..

1-529-942-11 SPEAKER (7.7cm)

Available in Part Store.

If you are looking for instruction manual, click Sony Support to download free copy.

Sony radios of this era had notorious capacitor problems.... also several other brands were affected. These capacitors were underrated and the technology to make them was not at it's best back then. The cure is to replace the capacitors on the board with new electrolytics. About 28 of them need to be replaced but the big problem is to find someone to do this. the original capacitors are surface mount and must be removed and new radial lead caps put in their place, some are rather tough to get at and the new ones have to be placed carefully. My SONY ICF-SW7600 now works as new and maybe even better!
I have done this myself as I have skills working with surface mount capacitors. I offer my services to those who cannot find service for their radios. Please email me for details, I am not into making bucks on this, I just want to see these radios kept working and bringing enjoyment to their owners.
Good DXing Rod KB8DNS