Setting the time and date

go to bios setup check the date and time if not corect then set date time save setting exit setup and check ..hope it will be okie..
if same format ur system ...Thanks

Just a quick note on what happens with my Olympus- apparantly, the only way to get dates onto photos is through print software. So far, I've found no option to put them on the disk files, and pretty much read the whole manual. You might try to print through PictBridge, and look for an option for adding the date and time. Good luck!

Click on Page Setup

Click on Custom Header or Footer, depending on where you want to see date and time.

You will see Left, Center, Right Sections, place your cursor wherever you want to set date and time.

You will also see 9 Icons above 3 sections, mouse over on Icon and it will show what they are.

Click on time and set the time

Click on Date and set the date

You can also add your header image by adding image to it.

I hope you will be able to get it.

Cheers

My machine goes this way-
Hit time/date button.
then enter in date (ie) 11.16.2009--INCLUDE DECIMAL!!!
Then hit time/date button again,

I am still working on the time issue, I just cant seem to remeber, I know it is done off military time.

you can Print the date and time to the picture when you take the print of it. It does not embed the date and time data into the image itself.

From the manual please read this
" Setting the date and time settings does not cause the date/time stamp to appear on images"

To print with date
This option will be available only for printing on card size paper

In the print order screen, select [Style] and press the SET button

You will get 3 options to set
1) Image
a) Standard b) multiple
2) Borders
a) Borderless b) Bordered
3) Date
a) On ( Adds the date to the print )
b) Off ( Prints without the date )

Select Date option as On and the date will be printed on the picture.


still you are having any doubts, please refer to user manual and Direct Print User Guide
which i am giving as links here.
user manual
Direct print user guide


Hope this helps you
Thank you

Here is your answer. I found it on page 52 of the manual in case you have yours and want to refer to it. Hope this helps.

Setting Date/Time, Display on/off.
1.Set camera to still image mode.
2.Press the button that looks like a oval with a "M"on the top. It may be called the Menu button. (I tried to find out what button this was but couldn't find that info.)
3.Press the right or left button to select the "date Stamp".
4. Press the up or down button to select the desired setting.
Select OFF and neither the date or time will be added your photos.
Select DATE and just the date will be added to your photos.
Select date & Time and both of those will show up on your photos.

Are you using the PictBridge compliant printer for the prints? If so click here to read page 75 for the setting on the printer. Go to the bottom of the PDF file, use the arrow to go to page 75. Don't follow the paging on the manual book itself, because this is a soft copy of PDF.

If you get prints from photo finishing center, then you probably have to order prints with date and/or time stamp added on.

As far as I know, W50 has no time stamp setting. Every image file carries its own date and time for printers to add the time stamp if printer has that function.

Hope this can help.

hi there on the front there is a small wheel turn your switch to the letter (m) then press down the small wheel on the right of machine, this will give you the menu so you cant change date from that hope that helps
mike

I cant program my phone.The CL light flashes and I cant do anything.

Hi,
To select the resolution Select the desired resolution according to the type of document.
“STANDARD”: For printed or typewritten originals with normal-sized characters.
“FINE”: For originals with small printing.
“SUPER FINE”: For originals with very small printing. This setting only works with other compatible fax machines.
“PHOTO”: For originals containing photographs, shaded drawings, etc.
Using the “FINE”, “SUPER FINE” or “PHOTO” setting will increase transmission time. If the resolution setting is changed during feeding, it will be effective

If you go to:
http://service.us.panasonic.com/OPERMANPDF/KXFHD331.PDF
You will find the online manual for this machine.
Hope this will help you...