On my D-Link Dir-825 Wireless Router, can I change my wireless networks name without having to go around reconnecting all the computers in my house afterwards

Limited connectivity (this phrase occurs first inside the WIN 8 OS) means, that you have connection with your router already, but NOT to the internet. Pls. check, if you have access to internet from other computers or smartphone connected via the same router.
If so, sometimes a driver-update for your D-Link could be useful.
Check also, if other wireless adapters are working with the same frequency, this may disturb. Try to change the channel or change from 2,4 GHz to the 5 GHz Channels, if the router & your D-Link Adapter will support this.
I had the same problem with my WIN 8 - PC and I had to change the (wireless) radio-channel.

Try 192.168.1.1 instead.

Just "reset" the router back to its "factory" settings, and then reconfigure it with a new SSID and password.

theres a button on router that says wireless on netgear router will be your best salution is to change routers because your router is protected and locked fron any out side performance.

Log into the router and change the SSID or wireless network name Open a web browser and enter http://192.168.0.1 and press Enter. When the login window appears, set the user name to Admin and leave the password box empty. Click Log In to continue. Go to the setup tab and it's there under configuration seesection 3 of the manual
Here is the manual
ftp://ftp.dlink.co.uk/dir_products/dir-615/DIR-615_Manual.pdf
please vote ta

There is a great article at Working with Windows Wireless Networks
If you need more help post back! Thumbs and testimonial are welcome!

Try changing the IP on the D-link to 192.168.1.2 .

check the connectivity again by assigning static IP Address to your DELL.. if problem occurs, clean install the drivers and dell Wifi software to your laptop.. Virus problem also results in this type of problem..

Hi Friend,

Firstly,u need to do following settings to u'rs belkin router: Default ip address of D-link dir-825 is 192.168.0.1
,so you can login to router setup page by http://192.168.0.1
1> You need to reduce MTU<Max.Transmission Unit> to 1400
2> Change wireless channel to 9/11
3> Wireless MAC ADDRESS CONTROL should be disabled for u're xbox
4> Reduce beacon interval to 50/75
5> Fragmentation Threshold:2306, RTS Threshold:2307
6> Disable the security/firewall of u're router
7> Do the port forwarding/trigerring;port numbers for xbox are:53,80,88,543,3478-3479,3658,5223,10070-10080

it will be good if u change wireless network name(SSID) as well as upgrade the firmware of u'rs router;so that it will reflect the effect & power down u're x-box while doing the changes in router.

If u need technical help in order to do the above changes in router have a words with belkin technical suppoprt.

change your routers IP address to IP address. 192.168.1.1.