I bought a 19 inch digital labs tv/dvd combo and it is not picking up channels from my cable cord? Do I need to return it or is there another way to fix it?
Wish I knew the answer ... I have the same problem after switching to Dish Network (Satellite). It worked fine with Time Warner Cable. I'm suspecting the signal over Dish is analog (NTSC) which is not supported by this particular TV. I wish I still had the box and receipt!
Testimonial: "Thanks, I am going to call the company tomorrow and see if they have a solution. If not I am not sure what to do. Thanks for your help."
Let me know if they have a solution! If so, I will regret having sold my TV today!
I have a phillip 42 inch TV I HAD IT FOR ABOUT TWO YEARS NOW IT WANT STAY ON . YOU TURN THE THE TV ON AND IT TURN ITSELF OFF WHAT IS THE PROBLE BECAUSE I DID NOT SEE THE IN THR TROUBLE SHOOTING MANUAL
1 make sure you have the input select set to cable box and the tv tuned to channel 3 or 4 (try both) 2 make sure the co-axial cable is connected correctly to the back of the tv and to the OUT TO TV from the cable box and that the cable box is turned ON. Make sure the co-ax from the wall is connected to the "IN" co-ax post on the back of the box. If you use an HDMI cable, make sure your tv is set to receive a signal over HDMI.
×
1,808 views
Usually answered in minutes!
kenmark tv i have a kenmark lvd164d 15 inch combi tv . when you turn the tv on and off regardless as to what channel you were watching prior to turning it off the tv keeps reverting to channel 19 . is there a solution to this problem as i would like to be able to turn tv off and he channel i was watching be the same one when i turn tv back on again
×