I recently ran out of room for pictures on my phone due to a vacation and wanted to upload them onto my laptop to have more space back on my phone. when i hooked it up to the special usb cord that goes into the computer, i pushed the cord's button that let's the computer read it.
after this happened, (which was last night) my phone now cannot get past the palm on loading screen and the palm powered screen. it just turns onto those and turns off. i tried resetting it the whole night by taking out my battery but that did no good.
i'm really frusterated and have no idea what to do.
any tip or bit of help, information even, would be great.
thanks.
I have a TREO650 and ran into a somewhat similar issue before. What you did by removing the battery was called a soft reset. There are 4 types of resets; soft, warm, hard and zero-out (personally I would not try this one just because it is difficult to do and it may make things worse in some rare instances).
Here is a website that describes the 4 types of reset and how to do them. http://mytreo.net/treofaq/Treo650Resetting
If the pictures to you aren't as important as getting your TREO working, I would suggest doing a HARD RESET.
As a suggestion for next time. Take your pictures and then transfer them to a 1GB SD card (the TREO 650 cannot accept any size larger than 1GB) and remove the SD card. Use a SD card reader in your PC to extract the pictures.
Good luck.
80 views
Usually answered in minutes!
×