At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Dear
You have upload the firmware of ML-1640, which is not possible. Try to upload ML-1666 firmware fix. You can also try covering a tape on the chip contact area only.
Thanks.
We have Zero cost solution for samsung -scx-4300, scx-4824/4828
ml-2240,ML 2245, ml 1640. clp 310/ 315, It is working permenently.
Refill cartridge is working for ever. which is running successfully.
also provide other new model reset solutions.
Download the firmware from herehttp://org.downloadcenter.samsung.com/downloadfile/ContentsFile.aspx?CDSite=in&CttFileID=2238869&CDCttType=FM&ModelType=N&ModelName=ML-1640&VPath=FM/200904/20090416100856890/ML-1640_V1.01.00.83.exe run the software and this will reset the page count to 0. Samsung printers generally do not support a refilled cartridge and thus the red light.But resetting the page count to 0 makes the printer detect the cartridge as an intoductory one.
Hi, the cartridge that came with your printer is a demo cartridge it has no chip or fuse on it, once this is finished normally you buy a cartridge with chip, but this is expensive, we just got a chip for this model, it will work on ML-1640, ML1641, ML-2240, ML-2241, ML-2242 Y ML-2245 this chip goes on the printer mainboard, it's a permanent one, never needs replacement , it will allow you to recharge the original demo cartridege , over ondo over again, if you need more info you can contact ma at [email protected], thank you..
RESET . Open the cover on the back of 1640 and see to small board . There is a m/s 93C66 near a big chip . Turn OFF the printer , connect pin 3 and 4 of 93C66 and turn printer ON . Hold on connected pin 3 and 4 of 93C66 until lamps on the front panel light , when lamps end light disconnect pin 3 and 4 of 93C66 . Now the page counter is 0 , and starting cartrige will work . May be different time between lamps on front panel OFF and disconnect pin 3 and 4 , it is about 0,5 sec , but may be larger or smaller , may be you will need to do this sequense once more . This method works if page counter before RESET not more than 2000 pages .
×