How to disconnect the Caller ID Voice? - Panasonic KX-TG5671 Phone

How do I turn off the Talking Caller ID on my phone? To turn off Talking Caller ID on the base;

1. Press [MENU] [#] [*] [1] [6] [2]
2. Press the [?] or the [?] button to turn the base Caller ID on or off.
3. Press [ SAVE ]

To turn off Talking Caller ID on one of the handsets;

1. Press [MENU] [#] [1] [6] [2].
2. Press the [?] or the [?] button to turn the handset Caller ID on or off.
3. Press [ SAVE ]

Note that the base and each handset are programmed individually.

How do I turn off the Talking Caller ID on my phone? To turn off Talking Caller ID on the base;

1. Press [MENU] [#] [*] [1] [6] [2]
2. Press the [?] or the [?] button to turn the base Caller ID on or off.
3. Press [ SAVE ]

To turn off Talking Caller ID on one of the handsets;

1. Press [MENU] [#] [1] [6] [2].
2. Press the [?] or the [?] button to turn the handset Caller ID on or off.
3. Press [ SAVE ]

Note that the base and each handset are programmed individually.

How do I turn off the Talking Caller ID on my phone?
To turn off Talking Caller ID on the base;
Press [MENU] [#] [*] [1] [6] [2]
Press the [?] or the [?] button to turn the base Caller ID on or off.
Press [ SAVE ]
To turn off Talking Caller ID on one of the handsets;
Press [MENU] [#] [1] [6] [2].
Press the [?] or the [?] button to turn the handset Caller ID on or off.
Press [ SAVE ]
Note that the base and each handset are programmed individually.

Say What?

'unknown caller when someone calls by using phone dialer' sounds as though the dialler is blocking its identity, which you can prolly do nothing about.

Could rephrase the rest of your Question at least two different way, for clarity, please?

Which phone are you using ? Check your applications if your have installed any software like Voice/Talking Caller Id or something similar . This software will be the reason the Caller id is a voice and not a ring-tone. Even check the settings in ring-tone if you and option to switch off Voice Caller id. Either uninstall the software or disable the software from the options within.

The Star Talk Flash is a voice mail prduct. The caller ID feature is a phone system feature. If your system is a norstar CICS or a MICS the caller ID will work only if you have the caller ID capable central office circuit packs installed. Look on the card and see if the label has "CLID". If it dose there is also additional programming required for each set under.... terminals &sets/telco features/featue assignments/show line/caller ID...set:Y. You also have to program (under sets) /telco features/caller ID: Y.

Hope this helps.

The caller id information is sent from your local telco provider after the first ring and might not be able to be extended to the individual sets, try backing off the ring to answer on your voice mail from 2 to 3 rings to see if the information is then passed on. The Voice Messaging System message is being sent from the system showing who transfered the call to you. You should also notice that the ring pattern when that message is displayed is a standard ring followed by a beep meaning a transfer is taking place.

Usually, fax machines don't have caller ID capability.. If the sender's fax number appears on the faxes you receive, it's just that they have programmed it into their fax machine as a header.

even I am waiting for this answer